Mate you need to look in the USB pen your using to FLASH and check the files in the ZGemma folder. One should say FORCE and I'll bet yours says NOFORCE. Simply edit the NO part out of NOFORCE and the FORCE file is what starts the FLASH.
Looking for help to reflash my box tryed doing this but no luck box just boots up and goes back onto my stations
Tryed that doesnt work whats the best usb stick to usereformat your usb to fat 32 and then try flashing again
Its zgemma star 2s dont really know what build to put on it any ideasuse a smaller one for flashing 2gb -4gb and they don't need to be branded, these boxes are a bit arsey with USB's. Which build are you trying to flash?
Tryed this with a 32gb didnt work al try a lower usb stick to see what happensGoto downloads, OK on wooshbuild and download the build for your box, extract the file and take the Zgemma folder and add this only to your usb.
with your box powered off at the back place the usb in the back slot, then power up from the back and your box should now flash, follow the guide and then add your line details again and your sorted
Low level format the stick first, not a standard format via PC.if you have a front usb slot try this and hold the power button on the front in until it boots and says flash
if you have a front usb slot try this and hold the power button on the front in until it boots
Hi garyth how do i obtain a cc cam lineif you have a front usb slot try this and hold the power button on the front in until it boots and says flash