You will have to reflash your box something has corrupted it make sure you have your iptv details and line details for sattalite if you was using themHi
When the box was booting yesterday there was a power cut and now it will not complete the boot.It counts up to 99 then starts again at 00 after stating there was a software problem. Has anybody any ideas for fix? Thanks for any advice.
I tried to reflash but the box goes to reboot with the same fault.you might need to reflash the box.Do you have all your details for the box to put back on it after flashing.
You did just put the zgemma file onto usb and used the rear USB port not the frontI tried to reflash but the box goes to reboot with the same fault.
I tried both with same resultYou did just put the zgemma file onto usb and used the rear USB port not the front
Have you tried formatting usb and downloading the right image as @BeakyFord has stated tru open atv 6.2 your box model will be in air digitalI tried both with same result
Why not just follow the instruction for putting Wooshbuild Infinity on the box, that way you wont need to find a working USB stick and will be able to confirm that you box is still 100% ok, you would also have the very latest build of woosh and ATV.I tried both with same result
TRUE, sorry forgot that stumbling block, my bad:emoji_disappointed:while his box is stuck on boot he cant load any builds as the box doesnt boot up fully, it needs a USB flash to get it to function
A new USB stick did the trick! Flashed Wooshbuild and have FTA channels at least . Manually installed the C line but that`s not working as yet.Thanks for help and quick responce.while his box is stuck on boot he cant load any builds as the box doesnt boot up fully, it needs a USB flash to get it to function