spanner123
Member
In oscam webif click readers at the top then for emulator click the trashcan on the right. Restart oscam. Not sure you need the constant cw and afn readers if using the posted softcam.key.
Bookies channels 4.8e
- Thread starter afterburn
- Start date
spanner123
Member
Delete them all and restat oscam. If still not working maybe update oscam- emu version. I think the latest is 11704-798. Are you using softcam file from earlier post? By the way put the softcam file in etc/tuxbox/config
Last edited:
afterburn
Member
I have done that still not clearing.
I have to got to work. Ill have another go later
Thanks.
afterburn
Member
Ok I bougfht a new zgemma combi receiver .Started from scratch and copied the working config files from the working receiver I have and presto it works on it.
There must be some legacy files on the xtrend 8500 preventing it from working.
I copied this line of text to the oscam server file. whether that mattered or not I'm not sure.
[reader]
label = constant.cw
enable = 1
protocol = constcw
device = /etc/tuxbox/config/constant.cw
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1FFF,1010
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000;1010:000000
group = 3
There must be some legacy files on the xtrend 8500 preventing it from working.
I copied this line of text to the oscam server file. whether that mattered or not I'm not sure.
[reader]
label = constant.cw
enable = 1
protocol = constcw
device = /etc/tuxbox/config/constant.cw
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1FFF,1010
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000;1010:000000
group = 3
afterburn
Member
So this is the oscam server file thats working in full.
[reader]
label = constant.cw
enable = 1
protocol = constcw
device = /etc/tuxbox/config/constant.cw
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1FFF,1010
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000;1010:000000
group = 3
[reader]
label = emulator
protocol = emu
device = /usr/keys/SoftCam.Key
disablecrccws_only_for = 0E00:000000
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
[reader]
label = constant.cw
enable = 1
protocol = constcw
device = /etc/tuxbox/config/constant.cw
caid = 0D00,0D02,090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1FFF,1010
ident = 0D00:000000,000004,000010,000014,000020,0000C0,0000C4,0000C8,0000CC;0D02:000000,00008C,0000A0,0000A4,0000A8;090F:000000;0500:000000,030B00,023800,021110,007400,007800;1801:000000,001101;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000000;1010:000000
group = 3
[reader]
label = emulator
protocol = emu
device = /usr/keys/SoftCam.Key
disablecrccws_only_for = 0E00:000000
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
pieeater2015
TK Veteran
Thats the reader for constant keys
[reader]
label = emulator
protocol = emu
device = /usr/keys/SoftCam.Key
disablecrccws_only_for = 0E00:000000
caid = 090F,0500,1801,0604,2600,FFFF,0E00,4AE1,1010
detect = cd
ident = 090F:000000;0500:000000,023800,021110,007400,007800;1801:000000,007301,001101,002111;0604:000000;2600:000000;FFFF:000000;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
group = 1
emmcache = 2,1,2,1
emu_auproviders = 0604:010200;0E00:000000;4AE1:000011,000014,0000FE;1010:000000
Thats the reader for Softcam keys
At least you got it working thats the main thing,just watch you don't lose all your money now backing Donkeys
afterburn
Member
Thanks pal.
I had it working on the other box anyway. I just didn't want the bother of swapping between the 2 to watch the racing.
I'll have another crack at that xtrend just for curiosity.
I might wipe it and start afresh.
Accelerated_Dragon
Member
Can you also open Discovery channels on 4.8e with this configuration. Not sure those channels are still working as I am struggling to tune.
afterburn
Member
I'll check later when I get back home.
afterburn
Member
Not opening for me. I have another box which has powervu on it. i might locate it and try it out.
Similar threads
- Locked
- Sticky
