Can't Get Internet to work on H2

Follow the instructions I sent before you do online flash
  • Press the Menu button on remote and select Setup -> System -> Storage Device -> Initialisation -> YOUR USB DEVICE -> Red Button.
    Once the initialisation has completed, hold the power button on remote until a menu appears and select Restart Gui.
  • Step 3 : Make sure the storage device is mounted correctly by pressing the RED button on the remote and selecting Plugins -> Mount ManagerYour storage device should be listed and should say Mount: /media/hdd.
    If it does just press the exit button until you exit the menus, if it doesn't press the Green button to Setup Mounts and using the Left/Right arrows on the remote change the mount until /media/hddis selected and press the Green button to save. Answer yes if prompted to restart the box
 
Attached file for you tommo with the latest firmware

1) download the file and unzip/extract it so it says zgemma then format usb and then transfer that file to your usb
2) power down the box and insert the usb into the rear port and power up the box to reflash
3) when box has reflashed go to the link below and click on , go to download in the top left ,green box and it will take you to woosh infinity and follow the guide (y)(y)

WooshBuild Infinity: Satellite, Cable, Freeview, Saorview, IPTV - For ALL Enigma2 boxes
 

Attachments

  • openatv-6.2-zgemmah2s-20190418_usb.zip
    88.3 MB · Views: 2
I posted the images for him but it don't matter which image he picks if not enough free space there is not enough free space :smiley:
 
Did you download filezilla client or filezilla server you need the client version or you will not be able to connect
 
Attached file for you tommo with the latest firmware

1) download the file and unzip/extract it so it says zgemma then format usb and then transfer that file to your usb
2) power down the box and insert the usb into the rear port and power up the box to reflash
3) when box has reflashed go to the link below and click on , go to download in the top left ,green box and it will take you to woosh infinity and follow the guide (y)(y)

WooshBuild Infinity: Satellite, Cable, Freeview, Saorview, IPTV - For ALL Enigma2 boxes
 
Ffs back again!! Downloaded the file mate,extracted it,then transferred zgemma file to usb. Turned box off,put in usb powered on and it just went to itv
 
How to Reflash Zgemma-star H1/2S guide

1,Download ZGEMMA H1& ZGEMMA 2S software

2, Unzip it and copy the Zgemma folder to the USB Stick (pre formatted to fat32)

3, Plug the USB stick to the back panel USB port.

4, Power on,

5, Press the Power Key on the front panel after you see “USB”on the display.Then the display shows “Flash”

When done the box will boot up on its own. Remove usb stick once boot has completed.
 
Back
Top