What's new
By:
Filters

Channels gone black on 19.2°E

Movistar keeps going on and off for me. It's very noticeable on M. Accion HD
They are defo up to something...
 
Last edited:
Yes was on Movistar and number of the channels stopped and went to sky Deutchland and working and then back to Movistar working and stopped on Blaze again
 
Moviestar possibly changing encryption
There is not many cards for 1810 Which it becomes very easy to send bad Cw The channels will go dark for 5 minutes Then o.k for
Ten minutes It might end up with private groups
with limited cards
 
FROM ANOTHER FORUM:

The attack on sporting events is carried out by Laliga. That's why he attacks only in matches. Movistar applied the same protocol to its movie, series and other channels, but they only implement it randomly on alternate days. They cannot use a long duration or very repetitive attack because it would give time to analyze how they do it. Therefore, use small intervals and specific days to attack by surprise. It seems that they are compiling a new emulator that would work against this measure, since it is gradually being implemented in most privacy


It looks like it's GAME OVER for now...
 
On FreeServer V_7.2.6 plugin using Oscam (11.704-emu-r798) - all 19.2E channels OK at the moment
 
Last edited:
dawber said:
It's not related to OSCAM version. Movistar deliberately infects cartain cards at certain times...
Click to expand...
It's off on both. I have 2 receivers. One running freeserver plugin as stated above and the other on normal servers with oscam both are off at the same time so less of the nonsense
 
There is definitly some skulduggery at play. Been having issues with really high ecm for a while now. Thought it was my supplier so didn't bother looking too into it. Thought I would have a quick look on here tonight and seems like you guys have same problems.

Well it was amazing while its lasted, 20 years nearly!!
 
Movistar are sending blank ecm before the real
Ecm which is effecting the Pirate decoders This will not effect there satellite decodes for there customers ECM stands for Entitlement Control Message and, basically, they are the keys that allow decoding the channels.
 
It was good while it lasted. I only wanted it for the tdt terrestrial channels Telecinco Antenna 3 etc. Did they kill that service on 30deg west?
 
Been out of the loop on this for a couple of months cos i was having problems updating my gigablue receiver to the latest openvix build.
Every time i updated i ended up with a blank screen, i had menu's etc, but no picture on any channel, no matter what build.
So i ended up restoring an old build from backup.
I've now figured out it was some sort of compatibility issue between my samsung 4k tv and my receiver after the updates.
Which is at fault i do not know but have found a weird workaround, thanks to google.
So i thought it was time to update my files now i have the latest version of openvix and oscam.
So i've read back through this thread and there's quite a few different files posted, plus mine are abit of a mess so can anyone give me any pointers on what i need to change?
These are my files that seemed to work quite well with my old version of openvix and oscam.

oscam.conf
-------------

[global]
disablelog = 1
logfile = /dev/tty
preferlocalcards = 1
lb_mode = 1
disablecrccws = 1
disablecrccws_only_for = 09C4:000000;098D:000000;1884:000000;092B:000000;1813:000068;1708:000000;1709:000000;0E00:000000;0500:030B00;0500:50F000;1811:003311,003315;1883:003311;1819:00006D

Config
Skip CWs checksum test:
09C4:000000;098D:000000;1884:000000;092B:000000;1813:000068;1708:000000;1709:000000;0E00:000000;0500:030B00;0500:50F000;1811:003311,003315;1883:003311;1819:00006D

[dvbapi]
enabled = 1
user = dvbapiuser
boxtype = dreambox
au = 1
pmt_mode = 0

[webif]
httpport = 9000
httpuser =
httppwd =
httprefresh = 10
httpallowed = 0.0.0.0 - 255.255.255.255

----------------------------------------------------------------------------------------------------------

dvbapi
--------

#
# dvbapi configuration
#
# format:
#
# priority:
# P: CAID[:][provider ID][:][service ID][:][ECM PID] [continue]
# P: 0100:000068
# P: 1803:000000
# P: 1813:000068
# P: 1861:000000
# P: 1884:000000
# P: 0B01:000000
#
# ignore:
# I: CAID[:][provider ID][:][service ID][:][ECM PID]
# I: 0B01:000000:13EE #CANAL+SPORT 2 HD
# I: 0B01:000000:32FC #CANAL+SPORT HD
# I: 0B01:000000:3A99 #CANAL+DOKUMENT HD
# I: 0B01:000000:3782 #CANAL+SERIALE HD
# I: 0B01:000000:377B #CANAL+FAMILY HD
# I: 0B01:000000:3779 #CANAL+FILM HD
# I: 0B01:000000:13ED #CANAL+1 HD
# I: 0B01:000000:32F0 #CANAL+PREMIUM HD
# I: 0100:000068:32F0 #CANAL+PREMIUM HD
#
# wait:
# D: CAID[:][provider ID][:][service ID][:][ECM PID] delay
#
# map:
# M: CAID[:][provider ID][:][service ID][:][ECM PID] target CAID[:][target provider ID]
#
# lenght:
# L: CAID[:][provider ID][:][service ID][:][ECM PID] length
#

P: 0963:000000 # prioritise CAID 0100 with provider 123456

#P: :000000 # prioritise ECM with provider ID 1234 on
# on any CAID and service

#P: 0100 # prioritise CAID 0200

#P: 0300::9ABC # prioritise CAID 0300 on service 9ABC only

#M: 0400 0500:123456 # map CAID 0400 to provider ID 123456 with
# CAID 0500

#D: 0600 200 # wait 200 ms before writing CW for CAID 0600

#I: :654321 # ignore provider ID 654321 for every CAID and
# service

#I: 0 # ignore every CAID that was not handled before

#L: 0700 8e # ECM length for CAID 0700 to 8e (hexadecimal)

-----------------------------------------------------------------------------------------------------------------

server
-------

[reader]

label=server1
enable=1
protocol=cccam
device=www1.xxxxxxxxxx.xxx,xxxxx
user=xxxxx
password=xxxxx
cccversion=2.3.0
group=1,2,3
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccmaxhops=10
ccckeepalive=1
cccwantemu=0
disablecrccws = 1
disablecrccws_only_for = 098C:000000;09C4:000000

[reader]

label=server2
enable=1
protocol=cccam
device=www2.xxxxxxxxxx.xxx,xxxxx
user=xxxxx
password=xxxxx
cccversion=2.3.0
group=1,2,3
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccmaxhops=10
ccckeepalive=1
cccwantemu=0
disablecrccws_only_for = 098C:000000;09C4:000000

[reader]

label=server3
enable=1
protocol=cccam
device=www3.xxxxxxxxxx.xxx,xxxxx
user=xxxxx
password=xxxxx
cccversion=2.3.0
group=1,2,3
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccmaxhops=10
cccwantemu=0
disablecrccws = 1
disablecrccws_only_for = 098C:000000;09C4:000000
------------------------------------------------------------------------------------------------------------------------------

I also note the file posted by linesman66 #757, but have no idea where to put that?
Any help would be greatly appreciated.
Thanks.
 
You must log in or register to reply here.
Back
Top