What's new
By:
Filters

Cable HELP - Can not flash - H5.2TC -TRIPLE TUNER

newcamd_LIST.JPG Still no joy !! Bloody Filezilla disconnects after 20 secs, made newcamd.list file, saved as All Files...Transfered and nothing...

I have had it shown as a TEXT file and as a LIST file on Filezilla/Filetype
 
a .txt file is no good, it needs a .list extension
once the .list file is in, reboot the box and restart the softcam

i assume you have scanned for channels?
set your netid ad got virgin as provider?

there's nothing in your mg_cfg file? - it's showing as 0 bytes?
 
in filezilla, click on the mg_cfg file and click view/edit
open it with notepad and paste all this crap in there, then close it
once it's in, restart the softcam:
Code: 
# EMM messages
#    00 don't show any EMMs (default)
#    01 show only valid EMMs
#    02 show valid and bad EMMs with complete data display
M: { 01 }

# ECM messages
#    00 don't show anything about ecm
#    01 normal mode, show pids processed, decoded ecm and cw
#    02 verbose mode, show valid and bad ECMs with data
C: { 01 }

# AU
#    00 disable, no emm pids processed
#    01 enable, emm pids always processed for soft-au and shared cards
#    02 auto, emm started only if channel cant be decoded
#    03 process emm pids for network cards update only
A: { 02 }

# key update (sum 01 or 02 with 04)
#    01 update only new keys, default setting
#    02 update all keys (used for valid PMK checking)
#    04 enable TPS au
#    + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0

# config files folder (softcam, autoroll, ignore/priority)
#    00 files in /var/keys
#    01 files in /tmp
T: { 00 }

# network mode, use summ for several clients
#    00 no network (default)
#    01 newcamd netclient
#    02 radegast netclient
#    04 camd3 netclient
#    08 gbox netclient
#    32    cccamd netclient, card list saved as /tmp/cccamd.info
#        (ECM only, supported server version up to 2.1.1, later not work)
G: { 33 }

# network retry, use summ for several options
#    00 disable
#    01 retry every new ecm
#    02 try to connect to offline shares every Q: seconds
#    04 try to detect and fast reconnect to lost (and not used atm) server
#    + XX messages number and YY seconds to reconnect
#    mg will reconnect to server, if no answer to last XX ecm/keepalive or
#    if no answer for last ecm or keepalive sent for YY seconds
#    set to 0 to disable
N: { 07 } 5 30

# network ecm timeout in seconds
K: { 10 }

# newcamd dead routes connect retry, sec
Q: { 600 }

# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }

# on screen display type
#    00 No OSD (default)
#    01 neutrino
#    02 enigma
#    03 relook
#    + user password for http auth
O: { 00 } username password

# on screen display Options, summ of:
#    01 show emu ecm
#    02 show network shares messages
#    04 show decoding failed / fta
#    08 show emm keys update
#    + web port to use for osd
S: { 03 } 80

# Log option, summ of:
#    00 off
#    01 network udp log
#    02 log to console
#    04 file, appended ! delete it by yourself, before it eat all your hdd
#    + IP udp-port log-file-name
L: { 00 } 172.16.1.1 28007 /tmp/mgcamd.log

# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }

# cache option, summ of:
#    00 Off (default)
#    01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
#    02 Ecm data cache, remember CW for (E:) time
#    04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }

# reread files, summ of:
#    00 No (default)
#    01 reread config file on channel change (including priority and ignore, but not replace/cache)
#    02 reread SoftCam.Key on channel change
#    04 reread SoftCam.Key if file changed
R: { 00 }

# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 06 }

# map all 180x nagra caids to 1801
# default is 01
F: { 00 }
 
Working !!!

I remember looking in that file and it was full of rubbish (i think)...I tried my line in there...lol

Thanks for ALL your help guys !!! ESP Pablo !!!

Now to do several other H2H box's !! Surely i can just go the process again on ONE box and download the image, then just flash to others and add/change line..

Can't THANK you enough....What a forum, been googling for DAY's and all info was on here, tried the LOT !!

Time for a well deserved beer !!!!
 
yeah you can flash one H2h with WB infinity and then do a backup, use that backup for the other H2h boxes
I've never actually done this myself but lots of others have, there's loads of info on this site about using backup images so you'll not go far wrong
Enjoy your beer :) :emoji_beers: :(y):
 
Little update here guys..
I have just had the box back (i gave it to my brother) and i can NOT seem to get it to scan channels OK?
It all looks OK in the tuner settings, it has my NET ID for my area and Virgin UK ALL selected on two of the tuners (other one is SAT so disabled)

I can not find any channels?
I have even reflashed box with the backup image i made when i done this (i flashed from box booting as normal with USB in front port).

Still nothing?? When i plug my old H2H box in it's fine??

Anyone got any idea's?

Thanks
 
You must log in or register to reply here.
Back
Top