pabloescaban
VIP Member
I teamveiwered in, ran abm, installed epg data, all channels clearing, tuner B enabled, A&C not configured
on my H7COut of curiosity, what is his tuner configuration for all the tuners?
Also, autmatic scan does not have as much control as manual scan.
i still set the net id in this 40962Thanks. But what is B set to? Reason for asking is to establish whether the cables.xml file needs amending.
Mine is set as follows:
Configuration: Enabled
Network ID: 00000 (it does not matter what you set in the UK/Ireland)
Used service scan type: Provider
Country: United kingdom
Region: Virgin Media UK (ex CW). If in Pure or Telewest area, change to that. If not sure, select Virgin (all systems)
And why are A&C disabled? Do they not have access to the signal wire/supply?
Roughly same here mate on anm, was just miffed why auto or manual scan found only 15 but as long as it’s working it’s all goodon my H7C
tuner a disabled i dont use satellite
tuner b enabled for cable
tuner c disabled
using abm find about 400 channels
Thanks biff will try when I’m homewhen you go onto manual scan
change it from predefined scan to complete
then scan
Please correct me if I am wrong. A Zgemma h7c has a single satellite tuner, a twin hybrid tuner. The hybrid tuner only has one input, like all other twin hybrid tuners. I presume people are setting up tuner B and C exactly the same instead of just setting Tuner B and thinking Tuner C will also be the same. If people are having a problem when both Tuner B&C are correctly configured and supplied with signal, surely this needs to be reported to Zgemma/Air Digital.
Please correct me if I am wrong. A Zgemma h7c has a single satellite tuner, a twin hybrid tuner. The hybrid tuner only has one input, like all other twin hybrid tuners. I presume people are setting up tuner B and C exactly the same instead of just setting Tuner B and thinking Tuner C will also be the same. If people are having a problem when both Tuner B&C are correctly configured and supplied with signal, surely this needs to be reported to Zgemma/Air Digital.
if i enabled tuner B & C and try a scan, i get an errorYou could be right.
In quite a few cases of twin cable tuners, I have set both cable tuners to the same settings and get this result, one tuner cannot tune into virgin and comes back with an error.
One cable tuner has to be set as 'not configured'.
I've only seen it on 4K boxes, H7, H9 etc, maybe anyone else can verify? - no problem on earlier twin cable tuner boxes (zgemma) it has to be said
so does tuner B & C need cable feeds in for both to work ???
Zgemma H7C
1x DVB-S2/S2X + 2x DVB-T2/C Hybrid tuner built-in
I know IPab not updated anymore... Any help!