What's new
By:
Filters

Ireland Golden v8 Issues???

C

calo

Newbie
I have bought a Golden v8.
I have live vm broadband in the house.
i have used a splitter 5-1000mhz one for broadband one for the cable box
i am in swords, dublin, so Frequency 158000 6887 qam256
but i get no signal, i do a scan but nothing, i thought all the normal vm channels would appear but encrypted.

do i need to setup cccam up first before a scan will work properly??

also on the golden v8 box there is no option to enter a netid.

please any advice is welcome.

thanks for reading
 
is the NET ID for swords not 43216 ?

I seen in a tutorial on this site where it says your freq is the first four digits of the net id?

432.1 maybe that was just for the Amiko

Could be completely wrong though haha
 
In swords Netid is 43216, have a zgemma myself so not sure about golden v8, you'll pickup channels without a line, manual scan these, modulation is 265

<cables>
<cable name="UPC Swords" satfeed="true" flags="9">
<transponder frequency="282000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="298000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="306000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="314000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="322000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="356000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="364000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="372000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="394000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="411000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="419000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="427000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="442000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="450000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="458000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="466000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="474000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="514000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="522000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="530000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="538000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="546000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="554000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="562000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="570000" symbol_rate="6875000" fec_inner="0" modulation="5"/>

</cable>

Hope this helps
 
Quickmine said:
is the NET ID for swords not 43216 ?

I seen in a tutorial on this site where it says your freq is the first four digits of the net id?

432.1 maybe that was just for the Amiko

Could be completely wrong though haha
Click to expand...

thanks but it didn't work. :)

jdsour said:
In swords Netid is 43216, have a zgemma myself so not sure about golden v8, you'll pickup channels without a line, manual scan these, modulation is 265

<cables>
<cable name="UPC Swords" satfeed="true" flags="9">
<transponder frequency="282000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="298000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="306000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="314000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="322000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="356000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="364000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="372000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="394000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="411000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="419000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="427000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="442000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="450000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="458000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="466000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="474000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="514000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="522000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="530000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="538000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="546000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="554000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="562000" symbol_rate="6875000" fec_inner="0" modulation="5"/>
<transponder frequency="570000" symbol_rate="6875000" fec_inner="0" modulation="5"/>

</cable>

Hope this helps
Click to expand...


heya yeah on the v8 it doesn't give you an option to enter a netid.

i will set modulation to 256, symbol rate to 6875 and go through them freqencies in the list.

thanks.
 
Last edited:
You must log in or register to reply here.
Back
Top