What's new
By:

Cable Only getting FTA , other channels blank

L

laroc

Newbie
Hi there mates,

Ive got a Zgemma H! box and It works fine when I got a test line last week, the line has rune out and when I change the line details into the urs/key newcam file and rebboot I ended up with just FTa channels. I have reflashed a few times and got throught the process of setting the box up but still nothing but FTA.

What goes first Newtork scan or ABM scan.

there must be something simple that Im missing, any help is welcome,

scott
 
Did you restart the soft cam. Press blue button and you should see mgcamd 1.38. you need to start it and enable autostart.
also have you put the mg.cfg file in to user/keys
 
Hi i have just bought a zgemma h1 and flashed it witph sucmsee image and i am having the same issue, the fta channels are working but the VM ones come up with a blank screen and a padlock next to it. not sure where ive went wrong.
 
where people go wrong is the type of line used nline or cline

i would use mgcamd 1.38 for nlines sent to usr/keys and 2 files in there are newcamd.list and mg_cfg.

i would use CCcam 2.30 for clines sent to etc.

one has to know if you have the cfg files on box first before using above info,both types are in downloads if needed.
 
cactikid, i was supplied a cccam.cfg file when i purchased line and ftp'd direct to the box etc folder restarted cccam 2.30 but still no luck.

the content of the file was N: server port user pass 01 02 03.....

Should i be adding that to newcamd instead?

thanks for the help
 
Still blank

ashley69 said:
Did you restart the soft cam. Press blue button and you should see mgcamd 1.38. you need to start it and enable autostart.
also have you put the mg.cfg file in to user/keys
Click to expand...


Ive restarted mgcamd and there is no improvement
 
hi there, I just been setting up zgemma h2h, got sat side set up no bother, but was only getting FTA and blank channels on cable side. managed to get it working by putting numbers on without spaces at end of line i.e 01020304 not 01 02 03 04 etc. hope this helps!
 
hi cactikid, 0102030405060708091011121314 only way I could get it working on both tuners on h2h, sat line has spaces as usual, but cable only working without spaces mate, only got test line for cable at moment, but that's only way I could get it working, done this on 2 test lines and working mate.
 
You must log in or register to reply here.
Back
Top