thomas88
Member
OpenHDF-5.3 - 720p Backup Build
View attachment 14725
View attachment 14740
View attachment 14741
View attachment 14742
Build info:
language english
AV 720p
INSTALLED ON THIS BUILD
Softcams:
MGcamd 1.38
CCcam 2.30
Plugins:
Cacheflush
EMC git20151003 (setup) DO NOT DELETE THIS BOX WILL NOT BOOT
Media scanner
OpenWebif
Plugin Updater
SoftWare Management
Swap Manager
XMLTV-Importer
Bootlogo:
SKY
skin:
Default - Nobile.HDF.mod
Spinner:
Default - HDF
ZGEMMA DISHCABLE'S SETTUP
plug one dish cable into tuner A. and the second cable into B.
or
plug single cable in to A. turn B off.
menu, setup, service searching,Tuner configuration,
set Tuner B: not configured
View attachment 14726
FLASHING THE ZGEMMA
1,Download Fast n Loud build software from the link.
2, Unzip it and copy the Zgemma folder to the USB Driver.
3, Plug the USB to the back panel USB port.
4, Power on,
5, Press the Power on.Then the display shows View attachment 14727
6, power off, reboot.
ZGEMMA S2 SETTUP
ADDING A BIGGER USB DRIVE TO THE BOX FOR RECORDING
1st to initialise your drive or AFTER FLASH (make sure zgemma folder is not on usb)
Insert usb in back
Turn on
Menu
Setup
devices
harddisk
Initialisation (select ur usb/hdd)
Initialise with red button
Now Check
Menu
Setup
devices
harddisk
filesystem check
then
Menu
Setup
devices
harddisk
convert ext3 filesystem to ext4
View attachment 14728
512MB SWAPFILE SETUP
Menu
plugins
Swap manager
Make sure its created, enable at startup and active- or see setup thread.
everything else should be set to correct paths after reboot.
View attachment 14729
SCANNING CHANNELS
Menu
setup
service searching
autobouquets maker
providers. Change sky uk: to your area.
save
delete bouquets
start scan
reboot
View attachment 14730
TUNER CONFIURATION
menu
setup
service searching
tuner configuration
choose tuner
tuner A
settings
simple
DiSEqc yes
then tuner B
settings
simple
DiSEqc no
View attachment 14731
FXP N-LINE & C-LINE
flashfxp setup on your pc
zgemma connected to router
we are using MGcamd 1.38, you will need to add your new N.line in the newcamd.list
ok lets get the box ip, menu,system,network,FTPsetup(running)good.. device setup,adapter settings. here you
can see the ip address. (my one is 192.168.1.98)and user interface is yes and use DHCP yes. network test all good.
so run fxp client connect, add ip, user:root password,root port,21
EDIT AND SAVE FILE
MGcamd 1.38 go to /usr/keys/ edit newcamd.list so it looks like this.
CWS = servicesat.syt.net 14030 gam0007 SatTO 01 02 03 04 05 06 07 08 09 10 11 12 13 14
save logout.
View attachment 14732
CCcam2.30 go to /etc/ edit CCCam.cfg
so it looks like this. C: 192.168.123.123 55123 et9000 et9000
save logout.
View attachment 14733
START SOFTCAM
Menu
Setup
devices
softcam / CI
softcam manger
restart softcam
exit
View attachment 14734
PICONS
add the picon folder to your HDD
SCREENS
View attachment 14735
View attachment 14736
View attachment 14737
View attachment 14738
View attachment 14739
Link:Mega File Upload - OpenHDF-5.3 - 720p Backup Build .rar
RAR Password:qwerty
build by Thomas88
View attachment 14725
View attachment 14740
View attachment 14741
View attachment 14742
Build info:
language english
AV 720p
INSTALLED ON THIS BUILD
Softcams:
MGcamd 1.38
CCcam 2.30
Plugins:
Cacheflush
EMC git20151003 (setup) DO NOT DELETE THIS BOX WILL NOT BOOT
Media scanner
OpenWebif
Plugin Updater
SoftWare Management
Swap Manager
XMLTV-Importer
Bootlogo:
SKY
skin:
Default - Nobile.HDF.mod
Spinner:
Default - HDF
ZGEMMA DISHCABLE'S SETTUP
plug one dish cable into tuner A. and the second cable into B.
or
plug single cable in to A. turn B off.
menu, setup, service searching,Tuner configuration,
set Tuner B: not configured
View attachment 14726
FLASHING THE ZGEMMA
1,Download Fast n Loud build software from the link.
2, Unzip it and copy the Zgemma folder to the USB Driver.
3, Plug the USB to the back panel USB port.
4, Power on,
5, Press the Power on.Then the display shows View attachment 14727
6, power off, reboot.
ZGEMMA S2 SETTUP
ADDING A BIGGER USB DRIVE TO THE BOX FOR RECORDING
1st to initialise your drive or AFTER FLASH (make sure zgemma folder is not on usb)
Insert usb in back
Turn on
Menu
Setup
devices
harddisk
Initialisation (select ur usb/hdd)
Initialise with red button
Now Check
Menu
Setup
devices
harddisk
filesystem check
then
Menu
Setup
devices
harddisk
convert ext3 filesystem to ext4
View attachment 14728
512MB SWAPFILE SETUP
Menu
plugins
Swap manager
Make sure its created, enable at startup and active- or see setup thread.
everything else should be set to correct paths after reboot.
View attachment 14729
SCANNING CHANNELS
Menu
setup
service searching
autobouquets maker
providers. Change sky uk: to your area.
save
delete bouquets
start scan
reboot
View attachment 14730
TUNER CONFIURATION
menu
setup
service searching
tuner configuration
choose tuner
tuner A
settings
simple
DiSEqc yes
then tuner B
settings
simple
DiSEqc no
View attachment 14731
FXP N-LINE & C-LINE
flashfxp setup on your pc
zgemma connected to router
we are using MGcamd 1.38, you will need to add your new N.line in the newcamd.list
ok lets get the box ip, menu,system,network,FTPsetup(running)good.. device setup,adapter settings. here you
can see the ip address. (my one is 192.168.1.98)and user interface is yes and use DHCP yes. network test all good.
so run fxp client connect, add ip, user:root password,root port,21
EDIT AND SAVE FILE
MGcamd 1.38 go to /usr/keys/ edit newcamd.list so it looks like this.
CWS = servicesat.syt.net 14030 gam0007 SatTO 01 02 03 04 05 06 07 08 09 10 11 12 13 14
save logout.
View attachment 14732
CCcam2.30 go to /etc/ edit CCCam.cfg
so it looks like this. C: 192.168.123.123 55123 et9000 et9000
save logout.
View attachment 14733
START SOFTCAM
Menu
Setup
devices
softcam / CI
softcam manger
restart softcam
exit
View attachment 14734
PICONS
add the picon folder to your HDD
SCREENS
View attachment 14735
View attachment 14736
View attachment 14737
View attachment 14738
View attachment 14739
Link:Mega File Upload - OpenHDF-5.3 - 720p Backup Build .rar
RAR Password:qwerty
build by Thomas88