R0BINH00D
Member
OK I have had loads ask how to do this
**THE EASIEST WAY IS**
For example your line will most likely be
CWS = something-notv.com 1234 R0BINH00D Techkings 01 02 03 04 05 06 07 08 09 10 11 12 13 14.... or something like that
We need it to be like this below
[reader]
label = TV1
protocol = newcamd
device = something-notv.com, 1234
key = 0102030405060708091011121314
user = R0BINH00D
password = Techkings
inactivitytimeout = 1
group = 1
ident = 0000:000000
***THERE ARE VARIOUS DIFFERENT WAYS TO CONFIGURE YOUR READER THIS IS A ROUGH Example I HAVE PROVIDED A BLANK ONE BELOW ***
[reader]
label = TV1
protocol = newcamd
device = your.server.com,port
key = 0102030405060708091011121314
user = username
password = password
inactivitytimeout = 60
group = 1
emmcache = 1,3,31
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
This needs to be in the Oscam Config file
Personally I use the simple way enter the IP of the box = 192.168.x.xx:8888
This brings up Oscam as in the first picture below
Press Files and look for Oscam Server
Click that and it gives you a look like in the second picture below
Clear that off and delete the empty readers insert your new line above in there and go to the bottom of the page and click SAVE exit out and restart your Oscam and you should have a FANTASTIC picture on your TV.. If not recheck your line and make sure you configured it correctly
Hope this helps
**THE EASIEST WAY IS**
For example your line will most likely be
CWS = something-notv.com 1234 R0BINH00D Techkings 01 02 03 04 05 06 07 08 09 10 11 12 13 14.... or something like that
We need it to be like this below
[reader]
label = TV1
protocol = newcamd
device = something-notv.com, 1234
key = 0102030405060708091011121314
user = R0BINH00D
password = Techkings
inactivitytimeout = 1
group = 1
ident = 0000:000000
***THERE ARE VARIOUS DIFFERENT WAYS TO CONFIGURE YOUR READER THIS IS A ROUGH Example I HAVE PROVIDED A BLANK ONE BELOW ***
[reader]
label = TV1
protocol = newcamd
device = your.server.com,port
key = 0102030405060708091011121314
user = username
password = password
inactivitytimeout = 60
group = 1
emmcache = 1,3,31
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
This needs to be in the Oscam Config file
Personally I use the simple way enter the IP of the box = 192.168.x.xx:8888
This brings up Oscam as in the first picture below
Press Files and look for Oscam Server
Click that and it gives you a look like in the second picture below
Clear that off and delete the empty readers insert your new line above in there and go to the bottom of the page and click SAVE exit out and restart your Oscam and you should have a FANTASTIC picture on your TV.. If not recheck your line and make sure you configured it correctly
Hope this helps
Last edited:
