Hi,
looking for a bit of guidance, not sure what else to try
I followed Bee's guide to setting up Enigma 2 box with OpenVIX (thanks Bee, very clear)
I got a test line, off eBay just to test my setup before buying a year sub, and vast majority of channels aren't working.
I know eBay lines are likely to be awful but this includes FTA channels - and before I added the test line I was only getting a very bad channel 5,no other FTA.
Since adding the line I get a couple of sky movie HD channels a couple of BT Sport SD channels and 1 or 2 other channels but still vast majority completely black screen. With No input at transponder message.
To rule out the line Garyth off here gave me a test line on his (Thanks Garyth) but no improvement, only the same handful of channels were working.
I have tried a new splitter (another labgear one) which was a four-way splitter, no improvement, in fact it slowed my broadband, SpeedTest showed only 40mbps of my usual 200mbps.
So I opened the VM box at the wall, it was just a VM cable coming in connected to a 1 in 1 out type splitter box. I unscrewed this and replaced it with my labgear 2 way splitter.
Broadband back to full blast - SpeedTest showed 213mbps - but still the same dozen or so channels on the Miraclebox.
I have went over the setup of the box, net id set to Belfast 00021, ABM ran and it picks up 387 TV channels, 37 radio and the full EPG for all the channels loads.
Anyone any ideas what else i could try?
looking for a bit of guidance, not sure what else to try
I followed Bee's guide to setting up Enigma 2 box with OpenVIX (thanks Bee, very clear)
I got a test line, off eBay just to test my setup before buying a year sub, and vast majority of channels aren't working.
I know eBay lines are likely to be awful but this includes FTA channels - and before I added the test line I was only getting a very bad channel 5,no other FTA.
Since adding the line I get a couple of sky movie HD channels a couple of BT Sport SD channels and 1 or 2 other channels but still vast majority completely black screen. With No input at transponder message.
To rule out the line Garyth off here gave me a test line on his (Thanks Garyth) but no improvement, only the same handful of channels were working.
I have tried a new splitter (another labgear one) which was a four-way splitter, no improvement, in fact it slowed my broadband, SpeedTest showed only 40mbps of my usual 200mbps.
So I opened the VM box at the wall, it was just a VM cable coming in connected to a 1 in 1 out type splitter box. I unscrewed this and replaced it with my labgear 2 way splitter.
Broadband back to full blast - SpeedTest showed 213mbps - but still the same dozen or so channels on the Miraclebox.
I have went over the setup of the box, net id set to Belfast 00021, ABM ran and it picks up 387 TV channels, 37 radio and the full EPG for all the channels loads.
Anyone any ideas what else i could try?