starview hd + mac help

[robbo100]

just installed carling hd+combo with cccam fix ,my mac address has changed to 0a 00 00 00 00 00. But now it will not allow me to change it back this option will not Highligh when in manual ,can you help

 

[keith]

THIS IS FOR THE STARVIEW HD COMBO + ONLY

IF YOURS DOES NOT HAVE A LAN PORT DO NOT USE THIS FIX!!!!!


You will need:

A computer with a serial port

A Null modem 9 pin serial cable (as used on the starview 1 - 3)

Connect the SV HD to the computer using the serial cable and attach to mains (leave turned off by switch on back)

UNZIP the file downloaded

open HD-200_Download.exe

Choose COM 1 (unless you have connected it to a different port)

Select software (HD300N_SC_RS232_1.bin)

Turn on receiver with rear switch

bar will start counting to 100%

WAIT UNTIL SOFTWARE SAYS COMPLETE!!!!

Turn off receiver and back on

P.S. This will also recover 'bricked' SVHD's (if there are any lights still on)

engsmile



can confirm that this works....fw can now bw changed

 

[robbo100]

nice one,but were do i get the software from to do this cheers

 

[noelyf]

If anyone is going to try this then do so at your own risk.

http://www.techkings.org/starview/12729-starview-combo-lost-channels.html

There have been reports of some boxes dying. Personally, I`d hold off until it is sorted.

 

[robbo100]

ok cheers