What's new
By:
Filters

Unicable Gigablue UE 4K Query

Drox

Drox

TK Veteran
B8F28AFE-F03B-4568-B232-B62414D61E1A.jpegI have installed a Inverto IDLU-32UL42-UNBOO-OPP JESS/Unicable II LNB. From the splitter, I have two cables coming to my UE 4K. However, I cannot get Tuners B to H to work.

I have tried various configurations, e.g. both B as a standalone tuner and I have also tried setting tuner B to be connected to tuner A. I have even swapped the SCR Bands/Frequencies for the various tuners, and that does not work either.

The cabling is fine, as tuner A works with both cables.

Even a manual/blind scan fails with tuner B.

Any suggestions are appreciated.


DA977870-8852-494D-89D9-28E44844C843.jpeg
954E547D-4E91-4046-93B0-A711FF441597.jpeg8A283FC1-645B-4F6C-93D9-E8B9CE7EE171.jpeg3A90A94C-4548-4284-A386-0718E376397F.jpeg
 
Ferret. said:
Do you have the IDLU-UST110-CUO1O-32P switch then as the the TYPE you have set.
Click to expand...

Nope, it was the only Inverto option that gave 32 user bands. Strangely, this 32 band option doesn't appear at all on the Octagon SF8008. I had to set the LNB as a different brand to get it working on there.


Willo3092 said:
Not sure what image you're running but these are my settings on ViX:

Your LNB should be LNB1 on every tuner.

View attachment 79258
Click to expand...

Thanks, I will give that a go tonight. Are you using different channels/user bands for each tuner?
 
Make sure you undo/disable the mistakes before you set the correct values. Otherwise you will have several LNBs configured on each tuner.

Might be easier/quicker to stop Enigma2 using Putty, edit the settings file, restart with Putty.
 
Drox said:
Nope, it was the only Inverto option that gave 32 user bands. Strangely, this 32 band option doesn't appear at all on the Octagon SF8008. I had to set the LNB as a different brand to get it working on there.




Thanks, I will give that a go tonight. Are you using different channels/user bands for each tuner?
Click to expand...
Yep i had that my LNB brand is not on the list. You just need to find one that has the same frequencies for each channel as Inverto use on that LNB.
 
You must log in or register to reply here.
Back
Top