please help, after fully setting up my zgemma on latiest sucmnsee image 19/9/15 I hit service update by accident and a message box needs to shut down and it rebooted and i lost both tuners I tried multiple rescans and wont find any channels after location and net ids in etc,i tried the image again and box will not flash it just boots straight up I even tried a openatv official image with no luck,i know its not the usb pen as it flashed perfect before hand and I have tried another pen and still the same,really desperate for help here guys
You've done the ONLY thing that can actually brick the box.
Assuming its not bricked (unlikely, but possible), you may still be able to flash it, but, the boxes are fussy re flashing - the following is an excerpt from my "idiots guide" to flashing sucmnsee's image on the zgemma section:
Download the HD Low Level format tool from here:
HDDGURU: HDD LLF Low Level Format Tool
Low level format your usb stick (click on continue for free, select your drive, choose continue, then choose the 2nd option near the top to low level format the drive.
Once done, then do a full format (ie not a quick format) in windows as a fat32 drive.
Expect each of the above to take up to 40 minutes a pop on a 32gig usb stick.
USB sticks confirmed as being able to flash the zgemma:
Integral 4gb, quick fat32 format (confirmed by Soberish).
Kingston 1gb Data Traveller, quick fat32 format (confirmed by Soberish).
Kingston 32gb usb sticks (confirmed by Satboynoob).
Kingston 16 Gb DataTraveller (confirmed by mtpockets).
Lexar 8Gb and 16Gb (confirmed by mtpockets).
Play.com branded 32gb usb stick : had to low level format & full windows fat32 format it twice before it would flash the device (confirmed by me!)
Sandisk Cruzer
Blade 16gb, first time no issues (confirmed by Mitchb).
Sandisk Cruzer Slicer 8gb from 7 day shop (£2.69!) : opened packaging, copied the
zgemma folder onto it, and it worked instantly (confirmed by me!)
TDK 16Gb Flip (confirmed by mtpockets).
Flashing the zgemma:
Now download the sucmnsee image from this site, and unzip it so that the image folder (the one called zgemma) goes on the usb stick, then put it in the back of the zgemma when switched off and power up the box.
Will say boot on the display, then FLSH.
If still says FLSH after 20 mins the flash has failed, and if the box boots normally, the flash hasnt started, meaning its probably ignored the usb stick (an all to common problem).
Full guide :
http://www.techkings.org/zgemma-sta...mnsees-image-every-step-explained-detail.html
