What's new
By:
Filters

What sky setting for freeview channels? Zgemma box

W

wakkaday

Member
hi
I have a zgemma h7c box

and I want to use the box to get freeview channels from sky and virgin if possible

it has 2 cable tuners and 1 sky tuner

I had a sky q box which has 2 wire feeds which I returned back, so that’s the cables I have but I get an error when I try and scan.. what is the sky setting I need for the free to air channels ...

I get sky uk Tuner a , frequency 11178 MHz

Please check affected tuner error

Setup tuner


Tuner set up is 28.2
Simple
Doseqc a b c d
No voltage

It doesn’t seem to pick up the channels list
 
wakkaday said:
hi
I have a zgemma h7c box

and I want to use the box to get freeview channels from sky and virgin if possible

it has 2 cable tuners and 1 sky tuner

I had a sky q box which has 2 wire feeds which I returned back, so that’s the cables I have but I get an error when I try and scan.. what is the sky setting I need for the free to air channels ...

I get sky uk Tuner a , frequency 11178 MHz

Please check affected tuner error

Setup tuner


Tuner set up is 28.2
Simple
Doseqc a b c d
No voltage

It doesn’t seem to pick up the channels list
Click to expand...
I don't think a sky-q dish/lnb will work with enigma2 box.
There's only about 4 channels on vm cable.
If you have an aerial you can scan for freeview using dvb/c/t tuner
 
There's only channels 1 - 5 SD on cable now anyway. You would be better plugging a terrestrial aerial in and scanning for Freeview.
Sky FTA is as the images if you don't have disecq:

1613675866395.png

1613676134817.png
 
thanks I will stick with the sky cables

I don’t have an Ariel unfortunately

so I get an error when I use auto bouquet maker

frequency 11778mhz

chdck affected tuner

Is this maybe because I have a sky q lnb installed ?

really I just want all the free view sky channels

I don’t need softcam do I ? Or check any other setting ...

using. Vix 5.309 image
 
wakkaday said:
thanks I will stick with the sky cables

I don’t have an Ariel unfortunately

so I get an error when I use auto bouquet maker

frequency 11778mhz

chdck affected tuner

Is this maybe because I have a sky q lnb installed ?

really I just want all the free view sky channels

I don’t need softcam do I ? Or check any other setting ...

using. Vix 5.309 image
Click to expand...
you will need to change the lnb you are wasting your time.
 
Five minutes unscrew the holder remove l.n.b fit l.n.b adjust to the same skew Angle
Tighten holder job done
 
Yes the one that fits the screw.

You mentioned Diseqc on the first why ? do you have a diseqc with other connections?
 
You must log in or register to reply here.
Back
Top