WilloBuild WilloBuild OpenViX 6.5 Series

[dsayers2014]

There's menu, setup but no storage, will look at it after lunch.

It's not seeing the USB format it to fat32 on pc then try again. Power off the box before removing USB

 

[urie]

I have the flashed files on the usb for openvix that's all.

you may not be seeing storage section because usb not inserted

 

[gavinvtaylor]

It's not seeing the USB format it to fat32 on pc then try again. Power off the box before removing USB

Yeah it's set to fat32

 

[urie]

Yeah it's set to fat32

format it again.

 

[gavinvtaylor]

Also if usb port at back you should put usb there because once intitalized you will not be removing it again unless something goes wrong .

Rebooted and it's found it.

 

[gavinvtaylor]

Think that's it sorted, thanks for your help, I'll give it a go after lunch again.

 

[gavinvtaylor]

Afternoon guys, that's it setup, I just have to get a new line and I'm good to go, can I thank you for your help, would have been stuck

 

[alan36]

Anyone any ideas i copy the script paste in putty starts to flash 2 loading bars come o n screen then it says on laptop connection to server lost then it bricks my box its happened twice im using zgemma h2h tanks

 

[Willo3092]

Which script are you using? It should be this one:

wget --no-check-certificate -O install_h3.sh http://www.willobuild.xyz/files/Scripts/install_h3.sh && bash install_h3.sh

Make sure you have storage mounted as /media/hdd and preferably formatted as ext4 R/W

 

[alan36]

Was using this

wget --no-check-certificate -O install_vix.sh http://www.willobuild.xyz/files/Scripts/install_vix.sh && bash install_vix.sh​

 

[Willo3092]

Was using this

wget --no-check-certificate -O install_vix.sh http://www.willobuild.xyz/files/Scripts/install_vix.sh && bash install_vix.sh​

That's why it doesn't work then.

WilloBuild | OpenViX | Enigma2 Firmware

 

[Oops]

Hi Willo3092, I'm trying your build m8, and using putty to connect but I'm getting "flash failed : connection timed out." any ideas?
Now I'm getting "cp write error no space left on device" ?

 

[Willo3092]

Make sure you have storage mounted as /media/hdd and preferably formatted as ext4 R/W

What type of box are you trying to flash?

 

[Oops]

I'm trying to flash a h2s

 

[pabloescaban]

I'm trying to flash a h2s

Is the USB initialised and mounted correctly?

 

[Willo3092]

Make sure you're using the correct script WilloBuild | OpenViX | Enigma2 Firmware

 

[Oops]

Is the USB initialised and mounted correctly?

Sorry for sounding dumb but how do I check if the USB is mounted correctly?

 

[pabloescaban]

Sorry for sounding dumb but how do I check if the USB is mounted correctly?

I'm not sure on Vix as I've never used it.
On openatv it's
Menu
Info panel
System info
Plugins
Mount manager

 

[Willo3092]

MENU > SETUP > VIX > MOUNT MANAGER

 

[moshibeth]

Was using this

wget --no-check-certificate -O install_vix.sh http://www.willobuild.xyz/files/Scripts/install_vix.sh && bash install_vix.sh​

Sorry for sounding dumb but how do I check if the USB is mounted correctly?

Might be easier to flash from backup.What is on the box at the moment ?