Zgemma flash help please

gregnic32

Member
Hi all l have spent quite a while setting up a zgemma star box with wooshbuild infinity and have made a backup to reflash other boxes of the same make. When l put the usb pen in the box it goes to "flsh" but never seems to finish the flash. l have tried different usb pens and still the same, here is whats inside the sh1 folder in the zgemma folder l created
force
imageversion
kernel.bin
rootfs.bin

What am l doing wrong, thanks.
 
IF using WB infinity you only need to flash with the base ATV 6.2 nightly image from OpenATV webby (Zgemma are under Air Digital) then follow instructions on the WB Infinity thread
 
prep the usb you want to use from scratch (low level format then fat 32 full format the smallest capcity usb you can find...2gb/4gb are perfect for flashing boxes) load nightly ATV 6.2 onto usb, change noforce file to force & save, place in rear port on box, power box on via white power button on rear....box will flash if you have correct base image for box model)... once flashed & box is restarting pull/remove the flash usb before the box starts its post count, place usb to be used as media/hdd in rear port of box (ntfs formatted usb of any size) then follow WB thread, do this for each box
 
Thanks for the reply but l have already flashed the box and just looking to flash a back up of the set up l have already done
 
Back
Top