I have wb v5.003 running - and the issue is still present prior to installing Xtream.
I setup a new USB hard drive last week - I did have issues getting the live pause to work initially but there were no issues for several days after install.
I have changed nothing else in the sub menus......
When you say download another build do you mean other that WB??
I would suggest installing a different build such as VIX or ipab and see if that works. Alternatively, I would opt for the latest version of Wooshbuild (v6) if you are only familiar with WB.
From the sound of things, your problem seems to be with your usb. What make is it? The fact that you were initially having problems with the live pause facility would suggest that the usb is not fully working with your box. I am 99.9% certain that your iptv sub and/or the xtreamtv plugin have nothing to do with your box crashing, and that it is your usb.
Just a few checks:
(1) is the usb is FAT32 format?
(2) MENU / SETUP / EPG / SETTINGS : is your location showing /media/hdd?
(3) then go to MENU / SETUP / RECORDINGS & TIMESHIFT / RECORDING SETTINGS on your box. Does it say 'Default movie location': /media/hdd/movie/?
(4) then do the same as (3) above but this time check your Timeshift settings ('timeshift location': /media/hdd/timeshift/)
If your location is different to /media/hdd/timeshift, then this will be the reason for your pause problems. If the default locations are the correct paths, then your hardware (usb) is the issue.
In which case, remove your usb from the back of your box; place in your PC, reformat to FAT32. Then safely remove from your PC, stick in the back of your box, and then firstly re-initialise your usb before re-mounting it. If you need instructions on this, let me know.
Just a reminder, prior to you re-formatting your usb, if you have recorded anything on your usb and don't want to lose those recordings, I would recommend you ftp/transfer your recordings from your usb to your PC (using Filezilla) but it may take a while depending on how many recordings you have. You will have to transfer them back after your usb has been reformatted and initialised & mounted. Also, if you have any auto-timers, I would recommend going onto WB Config first (through plugins) and back up your timers (but not your settings). Once again, you can bring them back later through WB Config. Remember though, WB Config will only work if you choose to stick with Wooshbuild.
Personally though, I would try the usb route first prior to reflashing your box. If possible, consider a different USB also. You could have a dodgy usb.
Sent from my SM-G925I using Tapatalk