Zgemma H92S won't enter flash mode

trying to flash my Zgemma H92S to upgrade my image

I have followed the instructions below:

-FAT32 formatted USB stick (this will send the "unzipped" h9 folder and 2 additional files [bootargs.bin and fastboot.bin] to the USB memory stick

-Renamed noforce file to force in the H9 folder

-take the USB stick safely out of your PC (i.e. properly remove it...)

-switch off your Zgemma H9 at the back, using the white power button

-shove the USB stick into the back USB port of your H9

-press and hold the small, black RESET button at the back, then

-press the white POWER button, while holding the RESET button

-once you see the LED flashing (changing colour between white and red), only then let go of the black RESET button

However, the LED does not flash Red and White however long I hold the reset button. At a loss on what to do next.

Help would be gratefully received.

Thanks
 
trying to flash my Zgemma H92S to upgrade my image

I have followed the instructions below:

-FAT32 formatted USB stick (this will send the "unzipped" h9 folder and 2 additional files [bootargs.bin and fastboot.bin] to the USB memory stick

-Renamed noforce file to force in the H9 folder

-take the USB stick safely out of your PC (i.e. properly remove it...)

-switch off your Zgemma H9 at the back, using the white power button

-shove the USB stick into the back USB port of your H9

-press and hold the small, black RESET button at the back, then

-press the white POWER button, while holding the RESET button

-once you see the LED flashing (changing colour between white and red), only then let go of the black RESET button

However, the LED does not flash Red and White however long I hold the reset button. At a loss on what to do next.

Help would be gratefully received.

Thanks
The box isn't recognising the USB stick, use a different one
 
Back
Top