Zgemma Star H9T 4K UHD DVB-T2/C Hybrid Tuner

Asldot

Registered
I just wanted to know people's thoughts or if anyone had bought one...
Looks like they still have not put enough internal memory in them again.
But have doubled up the processor speed to quad core now.
But why only 1 damn tuner and still no built in wifi..... Grrrr
zgemma9tfront.jpg
Seen em on sale for £99

ZGEMMA H9T
Specification: -

Linux Operating System
ARM processor with 1500MHz Quad-core CPU
Hi3798MV200 Main chipset
More than 4.10x linux kernel
One DVB-T2/C Hybrid tuner built-in
Support 4K- 2160p
256MB NAND Flash / 1GB DDR3 Memory
Picture in Picture (PIP)
SD card (TF card) for recording, 8GB, 64GB, 128GB (optional)
1 x USB3.0 and 1 x USB2.0
1x HDMI 2.0
1x 3.5mm AV
MPEG-2 / H.264 and H.265 Hardware Decoding
HEVC / H.265 2160p60 Main-10 multi-format decoder
10/100 Mbit Ethernet Interface
Multimedia plug-in supported
Advanced EPG (Electronic Program Guide)
User-friendly linux Menu system
Full automatic service scan
Various OSD skins supported
Various Channel Editing Programs
Easy and fast software-upgrade via USB
Low deep-standby power consumption under 1 W
Parental Control
Plugin Service
Excellent sound quality in Dolby Digital
OSD into many languages and graphics (Skins)
Web interface, WEB Remote control
DiSEqC 1.0 / 1.1 / 1.2 and USALS
External power supply 12V 1A
 
Sponsored Links

nicoj24

TK Veteran
Forum Supporter
Good box I'm working with supplier and stalker portal plugin developer about it not working the same has a mag box ie it doesn't refresh the streams on iptv and freezes so you have to switch to another channel and back again so it's basically still working has a enigma 2 box, where a mag box will just refresh and carry on playing stream if they get changed etc.
Once this is sorted it will be a superb box all round.
 

Mark845

Registered
Good box I'm working with supplier and stalker portal plugin developer about it not working the same has a mag box ie it doesn't refresh the streams on iptv and freezes so you have to switch to another channel and back again so it's basically still working has a enigma 2 box, where a mag box will just refresh and carry on playing stream if they get changed etc.
Once this is sorted it will be a superb box all round.
So is this issue getting fixed do you know
 

ludaloolo

Registered
Good box I'm working with supplier and stalker portal plugin developer about it not working the same has a mag box ie it doesn't refresh the streams on iptv and freezes so you have to switch to another channel and back again so it's basically still working has a enigma 2 box, where a mag box will just refresh and carry on playing stream if they get changed etc.
Once this is sorted it will be a superb box all round.
given feed back is very important to the producer of the box. talking is not enough. i should get my own H9S next week
 

Jonpickles70

Registered
my h9t is much better than h5 on vm but iptv bouquets freezes xometimes and wont play any channels and when this happens and I go back to normal vm tv bbc1 etc it takes ages to clear.twenty secs at least
 

dubzys

Registered
hi does anybody know how to get the mgcamd working on h9t, when i go onto softcam panel to select cam theres no mgcamd
 

pabloescaban

TK Veteran
Forum Supporter
hi does anybody know how to get the mgcamd working on h9t, when i go onto softcam panel to select cam theres no mgcamd
It's got an ARM processor, which means you can only use Oscam, or you can use a C line, if you download CCcam2.3.2 softcam which is specifically for those boxes
 

mikey07

Registered
I have one these boxes but I can’t seem to get it to show the picture.
I have put the c line into cccam.cfg then restarted cams and still nothing .Im running WooshBuild Infinity (open atv)When I scan ABM it picks up all the epg the lot.
It has a choice of cams:
CAM1-Oscam-ymod_18-t59
CAM2-Ccam_2.3.2
A don’t know if I’m selecting the correct cams etc looking for some help .Its a cable line I’m trying to install.
 

pabloescaban

TK Veteran
Forum Supporter
try cam1 as CCcam and cam2 as no cam, it doesn't really matter as long as one of them is set to cccam....you can try the line in an oscam.server file and use oscam
 

pabloescaban

TK Veteran
Forum Supporter
you need to make an oscam server file from your line, ask your supplier to send it as a newcam N: line and download willo's toolkit which contains 'guide to softcams and lines' which explains everything
 

tastheman

Registered
Can the Nline be added to the oscam folder or is can an NLine not be added. Supplier said takes both N line and C line
 
Top