On laptop/pc if you type in your box ip into browser it will open webif=mirror of your box and you can screenshot any setting.
Cable feeds would need good quality and good splitter but would have no bearing on sat quality.
I'd beg to differ,
crap cable will have an effect on sat, depending on how crap to how much an effect, albeit not so severe as cable
I'd beg to differ,
crap cable will have an effect on sat, depending on how crap to how much an effect, albeit not so severe as cable
Use the virtual remote on webif or real remote and refresh picure and have the box HIGH RESOLUTION TICKED as it gives a clearer picture
Install latest image instead of using 4.26.006
Grabbing screenshots off webinterface won't depict what picture is being shown on the TV.
Reception and video output are different things. These are digital devices. If reception was an issue, there would be breakup/tune failure. Not the alleged poor picture.
You will be using an image with the latest drivers that the manufacturer has added.
Ah, didn't see he had done a recent comparisonBut he says official box is better. Surely they are receiving the same broadcast.
OK, get latest drivers and kernel and use on your antiquated image then.
Your not doing anything to try and fix the problem if you changed a setting on box things might have changed,as said before reflash to another image and start from there.
Do other users use upscaling as i dont
But are you doing them in a logical manner,,?Just had to pop out.
When im back will take screenshot of settings via openwebif as you asked.
Have changed settings numerous times on both box and tv.
But are you doing them in a logical manner,,?
And not just randomly changing more than 1 setting at a time.?