1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

I need help please with my H.2H.

Discussion in 'General Cable TV.' started by jason310172, Dec 13, 2016.

  1. jason310172

    jason310172 Registered

    23
    0
    I've had no cable now for 4 days and I've spent hours and hours each day trying to sort it. I get channels 1-5 but the rest have padlocks logos and these are the ones not working. Now I bet your thinking like me its my N line not working, I've had the line checked and reset and still nothing, I've even had a new test line sent by another server and still nothing. I think I'm putting in the line details correctly after watching youtube and i have changed it from a N: to CWS = I've re-flashed the box and I think I have set it up right. So am i doing something else wrong, Or could it be my box is shot.

    Below is a photo of my EPG to show the channels locked and if you can please advise me on what to try next I would be very grateful.

    Jason

    [​IMG]
     
  2. dangerous

    dangerous TK Veteran

    3,148
    599
    Have you checked with your line supplier that it's ok to change it from a N to a CWS = line?
    Some servers have different ports for N lines, C lines and a mgcamd line (CWS)
    Have you actually had any lines working in your receiver?
     
  3. lancable

    lancable T K Veteran

    1,430
    72
    have you done a network test to box
    are you sure line is entered correct
    and is mgcamd active in softcams
     
  4. jason310172

    jason310172 Registered

    23
    0
    Hi thanks for your help. The 24 hr test line I have active at the moment was sent as a CWS line and that don't unlock the channels. My head is hurting from trying to sort this out.
     
  5. lancable

    lancable T K Veteran

    1,430
    72
    what image is on it

    where did you place newcamd.list
     
  6. jason310172

    jason310172 Registered

    23
    0
    Hi Lancable Yes the box is connected ok to my network and I think I have entered the line correctly and mgcamd is active but I'm not 100% confidant with FileZilla yet so not sure..

    Jason
     
  7. Willo3092

    Willo3092 TK Veteran Forum Supporter

    3,545
    1,035
    Was it sent as a newcamd.list file and have you copied it to /usr/keys and there is an mg_cfg file already in there?
     
  8. jason310172

    jason310172 Registered

    23
    0
    Sorry what do you mean by image ? and I copy and paste the CWS line into the key file.
     
  9. lancable

    lancable T K Veteran

    1,430
    72
    is image openatv or vix

    also as willo says is there a file in there called mg_cfg
     
  10. jason310172

    jason310172 Registered

    23
    0
    Thanks for you help. Its on Openatv and yes in the key file there is mgcamd_1.38r1
     
  11. lancable

    lancable T K Veteran

    1,430
    72
    mgcamd 138 is the cam

    is there a mg_cfg in there also
     
  12. jason310172

    jason310172 Registered

    23
    0
    Sorry for that. I've just gone back in to the key file and yes that file is there.
     
  13. lancable

    lancable T K Veteran

    1,430
    72
    and in softcam manager mgcamd is ticked and active

    red button -> plugins -> softcam panel
     
    Last edited: Dec 13, 2016
  14. Steveadti

    Steveadti Registered

    35
    0
    tried setting up the h5 myself tonite. Flashed with wooshbuild 5 .
    Tried to follow h 2s guide . Got stuck at deleting bouquets. No option came up.


    Sent from my SM-G935F using Tapatalk
     
  15. jason310172

    jason310172 Registered

    23
    0
    Sorry for my lack of knowledge with this openatv but as far as I can see then yes mgcamd_138r1 is active
    [​IMG]
     
  16. Willo3092

    Willo3092 TK Veteran Forum Supporter

    3,545
    1,035
  17. jason310172

    jason310172 Registered

    23
    0
    followed instructions and something is not right.. I'm too tired to concentrate now as been up since 6am and been trying to sort this out for over 12 of them hours. I will have another attempt at this after the school run and some breakfast. Thanks guys for all your help up to now..

    Goodnight :(
     
  18. cobblers

    cobblers Registered

    11
    0
    Jason, i think there may be an issue with the H2H and Ipab image, I think that is Openatv, (please correct me if wrong). running VM only. i am getting a box back today to check from a mate..
    it was working fine and he has lost all channels and cannot retrieve them..
    i have a H2H running slyk and VM and it works pretty much flawlessly, will check back in tonight to see how you're getting on.
    i am gonna try a copying my box details to his and/or try a different image.
     
  19. jnv

    jnv Registered

    31
    6
  20. snakefeet

    snakefeet Registered

    107
    8
    I use ipab on my h2h with cable you get a pdf file with full set uo instructions when you download the image.
    Make sure you have entered your NetID in your tuner and under advanced Bouquets managemnet - providers.
    Then populate database and possibly restart you cam.

    The pdf file Is a great guide with detailed instructions.
    You can find out what your netid in this forum.

    ---------- Post Merged at 08:15 AM ----------

    If your justs cable turn cam to off set to no cam.
    Disable tuner A too