afterburn
Member
(Guide to flashing mag USB Method)so ive read and read page 9,
can i get a step by step please as tbh i dont no how to edit it, ive downloaded the files and mine a 254 am i editing thouse files or am i editing something on the mag box its self is do im not sure how.
1)Download custom firmware
2) Connect your USB stick (use 4gb or smaller) to computer and format file system to FAT32, copy the correct image file for your mag onto the root of the USB Drive
3) On the USB drive you should now have the directory MAG250/254 this contains two files image update and bootstrap
4) Enter The MAG BIOS
(How to enter the BIOS setup (bootloader menu) MAG-250/254?)
a) Power off the MAG250/254.
b) Press and hold the «menu» button on the remote (This is the button Centre left of remote 3 parallel lines below the home button)
c) Without releasing the «menu» button, Power on the MAG-250/254.
you should now be in the BIOS menu.
5) Select “Upgrade Tools”, press ok (or arrow right)on the remote control
6) Select “USB Bootstrap”
7) Connect the USB flash drive( to rear port if available) and click OK to confirm the beginning of the update process
8) Wait for the update, STB will reboot itself.
9) You should now have the new firmware on the box.
(You can check you have the new firmware version from the inner portal under device info)
Last edited: