Oh!! Ok, I found it. I was looking more at the video settings. Yes, this H7S has the brightness settings for the front panel, but only for the clock, the Logo remains on full bright. There is a Show Display Icons on the front panel setting, which does nothing to the Logo, still on full bright. You might have to use your black tape after all. [emoji5] Wouldn't be too bad if there was a way to change the front panel colors, maybe on the H7S+ model.menu
usaage and gui
display
display setttings
i have min off and its set too
brightness (norm) 0
brightness (dim) 0
brightness (standby) 0
im on atv
Yeah, the top three settings and Power On Display setting only affect the front clock display, the Air Logo still remains on full bright. Probably needs a Plugin Developed for it. [emoji3]You did the top you the top 3 to zero yea?
And it stayed at full brightness. Weird setup
LOL!! [emoji3][emoji3][emoji16][emoji16] It doesn't affect me any, I have my H7S placed well off to the left side of the TV with my other boxes. You could disassemble the top cover and remove the front panel circuit board out of the box to place black tape over the Logo Block, if you don't want black tape on the outside of the box. Or you could peel off the Logo Sticker off of the Logo Block inside and replace it with another transparent logo sticker you like better. [emoji3] The screws tend to be soft though. [emoji3] I went digging in to find the red and green LED's that the instructions talk about being on the front panel. But apparently, those LED indicators were never installed on the front panel, they changed the design for that too.Balls to that
Black tape it is then
So it took a few extra months for that silly
Of course!! [emoji3][emoji3][emoji16][emoji16] Doesn't everybody??? LOL!!correct the user manual appears to be an updated version of their old manual & the green/red light that shows green when powered on or red when in standby was relevant to the other models but on the H7 the new logo has replaced where the led was
@chriscromwe.... you read the manual lol
Ok, thank you! [emoji5] I did make a recovery backup, so that's what I would need to go back to, right? Or is an image backup all I really need? [emoji3][emoji5]Yes reflash will remove everything and put on what image your flashing so always make a backup before trying new images
Sent from my SM-G925F using Tapatalk
Awesome! Thank you! [emoji3]If you did a backup by blue button, software manager, complete backup yes
No, but I did pull the top off of the box for a good look see! [emoji3][emoji16]Did you all see the guts of the h7 over at Linuxsat