Usb flash it with openatv first which will wipe the box then mount the usb and run grog build.No but it is stuck on boot screen for wooshbuild .. Tried to reflash but it won't work via usb for some reason. The same usb I installed it with. So thought I would try grogbuild but got this error.
What make USB is itmy usb flashing is not working -have tried various images on various usb's. That was why I thought I would flash via putty
1 is a sandisk and the other just a generic . Both usb 2.0 one is 16GB one is 8GBWhat make USB is it
I have used the 8gb before to flash and it was fine1 is a sandisk and the other just a generic . Both usb 2.0 one is 16GB one is 8GB
Low level format it with hddguru then fat 32 and try with openatv 6.4I have used the 8gb before to flash and it was fine
will doLow level format it with hddguru then fat 32 and try with openatv 6.4
To stop enigma2 from running, open putty or webif and issue the commandwill do
Thanks I have tried that but still getting the same messageTo stop enigma2 from running, open putty or webif and issue the command
init4
Click enter.
Then run the Grogbuild command line
I think there's a space between init and 4:Thanks I have tried that but still getting the same message
I have tried both waysI think there's a space between init and 4:
init 4
Did you low level format the usb with HDDGuruI have tried both ways
Yes.. Still won't flash from USB. I think it might be the box. I've had the box since 2017...Did you low level format the usb with HDDGuru
It's not the box, it's the usb not being recognised, try a few, make sure you format them on the pc (FAT32) then put the unzipped flash files on there.Yes.. Still won't flash from USB. I think it might be the box. I've had the box since 2017...
Vu solo2se. I have tried openpli, wooshinfinity which worked for a year until it rebooted, blackch, openatv,.It's not the box, it's the usb not being recognised, try a few, make sure you format them on the pc (FAT32) then put the unzipped flash files on there.
If one doesn't work, try a different one and so on until one flashes the box
You haven't said what model box is in use or what images you have tried
Never used blackch or pli but infinity isn't an image as such.Vu solo2se. I have tried openpli, wooshinfinity which worked for a year until it rebooted, blackch, openatv,.
Done that.. Nothing happens. I just get blank screen or back to boot screen for wooshbuildNever used blackch or pli but infinity isn't an image as such.
Download the latest openatv 6.4 for your box and unzip it to your pc.
Put the unzipped vu solo folder onto the usb and into the powered off box.
Power on and keep finger on standby button until it shows on-screen that it's begun flashing, then release the standby button