Channels gone black on 19.2°E
- Thread starter mike142
- Start date
pieeater2015
TK Veteran
How long has Sky Sports Premier League been broadcasting in English on Sky Germany?
It might change come matchday
pieeater2015
TK Veteran
See what happens when the game kicks off.
pieeater2015
TK Veteran
Sat but it is a bit glitchy,i am not using a dedicated sub for Sky Germany.If the games are in english though might be worth getting one
I thought sky Germany got shut down on sat like sky UK did
It's been back open for a month od so, id advice against a sub though. Sky UK was also open for a short time a couple of months ago now off again.
pieeater2015
TK Veteran
The commentary has gone back to German when the game kicked off
Latest oscam emu with icam patch
Due to many plugin and oscam icam settings, the user can make mistakes and make mistakes when configuring.
The mistake one makes is to change the emulators and config files too often or to install and uninstall them and the receiver image comes to a standstill and does not run at all.
not everything is described in the previous instructions that you have to rename all files, how and where?
My recommendation:
First you uninstall all emus but cccam can stay and restart receiver.
Then install an oscam. There can only be one oscam in the receiver oscam stable or mod or trunk.
(oscam must be running afterwards. ACTIVE)
Executed/transferred with the tool flashfxp
in the Enigma settings/extras (ATV: MENU/SETTINGS/OPERATION & INTERFACE/ system settings):
Set Integrate ECM in HTTP streams to YES
Decrypt HTTP Streams NO
Decrypt received HTTP streams NO
1. Transfer the softcam.oscamicam under etc\init.d and rename it to softcam.oscam-icam. RIGHTS 755
2. Transfer the config files oscamicam under etc\tuxbox and rename the oscamicam folder to oscam-icam RIGHTS 755
and configure accordingly according to the instructions from the provider.
3. Transfer the oscamicam.emu to etc
4. Transfer the bin oscamicam to usr/bin. and watch out here with the flashfxp,
transfer the oscamicam as oscam-stable with flashfxp so that the old oscam-stable is replaced
5. Transfer the bin oscamicam to usr/bin. and transfer the oscamicam as oscam-icam with flashfxp. RIGHTS 755
6. Create iCAM user for Radegast:
//oscam.user
[account]
user = icam
pwd =
groups = 1,2,3,4,5
7. Copy Config, Stream Relay only 1 CAID.
//oscam.conf
[radegast]
port = 9090
allowed = 127.0.0.1,192.168.0.0-192.168.255.255
user = icam
[streamrelay]
stream_ecm_delay = 0
stream_relay_ctab = 098D
8. Import channel list.
9. Copy the file to etc/enigma2 and do a search, then edit the bouquets.tv file there and enter the following:
#SERVICE 1:7:1:0:0:0:0:0:0:0:FROM BOUQUET “userbouquet2.tv” ORDER BY bouquet
10. Softcam Panel Select the Softcam oscam-icam with the blue button and confirm with green.
Very IMPORTANT.: restart the box (not a gui restart) if the receiver hangs when restarting,
please unplug the power cord and switch on the receiver again normally.
Select the channel Sky icam no matter which one and wait about 5 seconds. The picture is then there.
Changes the channels from the sky…then the others also run wonderfully.
Enjoy sky channels on oscam icam
Due to many plugin and oscam icam settings, the user can make mistakes and make mistakes when configuring.
The mistake one makes is to change the emulators and config files too often or to install and uninstall them and the receiver image comes to a standstill and does not run at all.
not everything is described in the previous instructions that you have to rename all files, how and where?
My recommendation:
First you uninstall all emus but cccam can stay and restart receiver.
Then install an oscam. There can only be one oscam in the receiver oscam stable or mod or trunk.
(oscam must be running afterwards. ACTIVE)
Executed/transferred with the tool flashfxp
in the Enigma settings/extras (ATV: MENU/SETTINGS/OPERATION & INTERFACE/ system settings):
Set Integrate ECM in HTTP streams to YES
Decrypt HTTP Streams NO
Decrypt received HTTP streams NO
1. Transfer the softcam.oscamicam under etc\init.d and rename it to softcam.oscam-icam. RIGHTS 755
2. Transfer the config files oscamicam under etc\tuxbox and rename the oscamicam folder to oscam-icam RIGHTS 755
and configure accordingly according to the instructions from the provider.
3. Transfer the oscamicam.emu to etc
4. Transfer the bin oscamicam to usr/bin. and watch out here with the flashfxp,
transfer the oscamicam as oscam-stable with flashfxp so that the old oscam-stable is replaced
5. Transfer the bin oscamicam to usr/bin. and transfer the oscamicam as oscam-icam with flashfxp. RIGHTS 755
6. Create iCAM user for Radegast:
//oscam.user
[account]
user = icam
pwd =
groups = 1,2,3,4,5
7. Copy Config, Stream Relay only 1 CAID.
//oscam.conf
[radegast]
port = 9090
allowed = 127.0.0.1,192.168.0.0-192.168.255.255
user = icam
[streamrelay]
stream_ecm_delay = 0
stream_relay_ctab = 098D
8. Import channel list.
9. Copy the file to etc/enigma2 and do a search, then edit the bouquets.tv file there and enter the following:
#SERVICE 1:7:1:0:0:0:0:0:0:0:FROM BOUQUET “userbouquet2.tv” ORDER BY bouquet
10. Softcam Panel Select the Softcam oscam-icam with the blue button and confirm with green.
Very IMPORTANT.: restart the box (not a gui restart) if the receiver hangs when restarting,
please unplug the power cord and switch on the receiver again normally.
Select the channel Sky icam no matter which one and wait about 5 seconds. The picture is then there.
Changes the channels from the sky…then the others also run wonderfully.
Enjoy sky channels on oscam icam
pieeater2015
TK Veteran
I used Ncam 13.2
Added the userbouquet.ttc_icam_skyde.tv,
Edited the bouquets.tv,
changed the setting in webif,
| Include ECM in http streams | / |
| Unscramble http streams | |
| Unscramble receiving http streams | |
| Require authentication for http streams |
Then entered my line in the icam reader
I deleted all cams and config folder before installing ncam
You can change the settings in Gui encryption
By the receiver
By the receiver
The Guvnor
Member
What transponders are you looking for and I’ll check my 85cm fixed on 16e?
Is this running on OpenATV or VIX? I can get it working on OpenATV, but on VIX the softcam won't start. I didn't do that step of deleting my other cams though, will try that if it's VIX you are using.
pieeater2015
TK Veteran
OpenATV with Ncam,Oscam with Vix, i only tried oscam with vix
