Latest oscam emu with icam patch
Due to many plugin and oscam icam settings, the user can make mistakes and make mistakes when configuring.
The mistake one makes is to change the emulators and config files too often or to install and uninstall them and the receiver image comes to a standstill and does not run at all.
not everything is described in the previous instructions that you have to rename all files, how and where?
My recommendation:
First you uninstall all emus but cccam can stay and restart receiver.
Then install an oscam. There can only be one oscam in the receiver oscam stable or mod or trunk.
(oscam must be running afterwards. ACTIVE)
Executed/transferred with the tool flashfxp
in the Enigma settings/extras (ATV: MENU/SETTINGS/OPERATION & INTERFACE/ system settings):
Set Integrate ECM in HTTP streams to YES
Decrypt HTTP Streams NO
Decrypt received HTTP streams NO
1. Transfer the softcam.oscamicam under etc\init.d and rename it to softcam.oscam-icam. RIGHTS 755
2. Transfer the config files oscamicam under etc\tuxbox and rename the oscamicam folder to oscam-icam RIGHTS 755
and configure accordingly according to the instructions from the provider.
3. Transfer the oscamicam.emu to etc
4. Transfer the bin oscamicam to usr/bin. and watch out here with the flashfxp,
transfer the oscamicam as oscam-stable with flashfxp so that the old oscam-stable is replaced
5. Transfer the bin oscamicam to usr/bin. and transfer the oscamicam as oscam-icam with flashfxp. RIGHTS 755
6. Create iCAM user for Radegast:
//oscam.user
[account]
user = icam
pwd =
groups = 1,2,3,4,5
7. Copy Config, Stream Relay only 1 CAID.
//oscam.conf
[radegast]
port = 9090
allowed = 127.0.0.1,192.168.0.0-192.168.255.255
user = icam
[streamrelay]
stream_ecm_delay = 0
stream_relay_ctab = 098D
8. Import channel list.
9. Copy the file to etc/enigma2 and do a search, then edit the bouquets.tv file there and enter the following:
#SERVICE 1:7:1:0:0:0:0:0:0:0:FROM BOUQUET “userbouquet2.tv” ORDER BY bouquet
10. Softcam Panel Select the Softcam oscam-icam with the blue button and confirm with green.
Very IMPORTANT.: restart the box (not a gui restart) if the receiver hangs when restarting,
please unplug the power cord and switch on the receiver again normally.
Select the channel Sky icam no matter which one and wait about 5 seconds. The picture is then there.
Changes the channels from the sky…then the others also run wonderfully.
Enjoy sky channels on oscam icam
How do I find this part in "Openvix 6.2.010"?Latest oscam emu with icam patch
Due to many plugin and oscam icam settings, the user can make mistakes and make mistakes when configuring.
The mistake one makes is to change the emulators and config files too often or to install and uninstall them and the receiver image comes to a standstill and does not run at all.
not everything is described in the previous instructions that you have to rename all files, how and where?
My recommendation:
First you uninstall all emus but cccam can stay and restart receiver.
Then install an oscam. There can only be one oscam in the receiver oscam stable or mod or trunk.
(oscam must be running afterwards. ACTIVE)
Executed/transferred with the tool flashfxp
in the Enigma settings/extras (ATV: MENU/SETTINGS/OPERATION & INTERFACE/ system settings):
Set Integrate ECM in HTTP streams to YES
Decrypt HTTP Streams NO
Decrypt received HTTP streams NO
1. Transfer the softcam.oscamicam under etc\init.d and rename it to softcam.oscam-icam. RIGHTS 755
2. Transfer the config files oscamicam under etc\tuxbox and rename the oscamicam folder to oscam-icam RIGHTS 755
and configure accordingly according to the instructions from the provider.
3. Transfer the oscamicam.emu to etc
4. Transfer the bin oscamicam to usr/bin. and watch out here with the flashfxp,
transfer the oscamicam as oscam-stable with flashfxp so that the old oscam-stable is replaced
5. Transfer the bin oscamicam to usr/bin. and transfer the oscamicam as oscam-icam with flashfxp. RIGHTS 755
6. Create iCAM user for Radegast:
//oscam.user
[account]
user = icam
pwd =
groups = 1,2,3,4,5
7. Copy Config, Stream Relay only 1 CAID.
//oscam.conf
[radegast]
port = 9090
allowed = 127.0.0.1,192.168.0.0-192.168.255.255
user = icam
[streamrelay]
stream_ecm_delay = 0
stream_relay_ctab = 098D
8. Import channel list.
9. Copy the file to etc/enigma2 and do a search, then edit the bouquets.tv file there and enter the following:
#SERVICE 1:7:1:0:0:0:0:0:0:0:FROM BOUQUET “userbouquet2.tv” ORDER BY bouquet
10. Softcam Panel Select the Softcam oscam-icam with the blue button and confirm with green.
Very IMPORTANT.: restart the box (not a gui restart) if the receiver hangs when restarting,
please unplug the power cord and switch on the receiver again normally.
Select the channel Sky icam no matter which one and wait about 5 seconds. The picture is then there.
Changes the channels from the sky…then the others also run wonderfully.
Enjoy sky channels on oscam icam
Thanks, i'll gave a go!In the Settings menu in Webif inside the EXTRAS menu
View attachment 82165
Menu-setup-system-customiseHow do I find this part in "Openvix 6.2.010"?
in the Enigma settings/extras (ATV: MENU/SETTINGS/OPERATION & INTERFACE/ system settings):
thanks
thanksSKY DE ICam - ORF - HD+ Enigma2 Settings by Lippei
userbouquet.skyit-DREMMA IKS
Menu-setup-system-customise
I got as far as no4 and got stuck, and gave up!In the Settings menu in Webif inside the EXTRAS menu
View attachment 82165
I've given up trying this at no4!thanks
To tell the truth. I didn't understand it after stage four!Use the Atari method. Takes a couple of mins
python -c "$(wget https://raw.githubusercontent.com/MOHAMED19OS/Download/main/Emu/installer.py -qO -)"
-iCam work with (DVBAPI and Radegast)
image settings for open source image
Radegast:
Set Integrate ECM in HTTP streams to YES
Decrypt HTTP Streams NO
Decrypt received HTTP streams NO
DVBApi:
Set Integrate ECM in HTTP streams to NO
Decrypt HTTP Streams YES
Decrypt received HTTP streams NO
Thanks. it will not load "File name too long" or "command not found"I used Mohamad's installer and it was really easy. It gives you option of oscam or ncam, I went with ncam and it worked perfect. Also works with the AFN channels on 9e.
Code:python -c "$(wget https://raw.githubusercontent.com/MOHAMED19OS/Download/main/Emu/installer.py -qO -)"
OSCam V117.14
How are you running this command? Are you using a PC to connect to your box? I'm on a mac so it'll be different for me, but hopefully someone else can offer some help.Thanks. it will not load "File name too long" or "command not found"
Thanks. I'll try again.Download the ipk file for oscam or ncam
Using f.t.p program like filezilla Tranfer the file
to var temp folder Then goto plugins ipk installer
Then press ok on the file to install power of reciever and the oscam file will be there
PC via dreambox (DCC-E2)How are you running this command? Are you using a PC to connect to your box? I'm on a mac so it'll be different for me, but hopefully someone else can offer some help.
Created bouquet, then stuck after thatConfiguring Emigma2 parameters
You need to properly configure Enigma2’s advanced options. This can be done using the remote control in the receiver settings or via the emigma2 web interface.
In different firmware, the menu item is called differently. For example, in OpenATV 7.0 you need to go to Menu -> Setup -> Usage & GUI -> Customize System Settings section.
In my case (OpenBH) it is MENU -> Setup -> System -> Customise
The following parameters must be set:
Include ECM in http streams –YES
Descramble sending http streams – NO
Descramble receiving http streams – NO
Require authentication for http streams – NO

Or by Web interface:

5. Creating a bouquet, adding a channel list.
Go to /etc/enigma2 directory on your receiver and open bouquets.tv file. At the end of the file, add the line:
#SERVICE 1:7:1:0:0:0:0:0:0:0:FROM BOUQUET "userbouquet.SkyDeIcam.tv" ORDER BY bouquet
Then upload the userbouquet.SkyDeIcam.tv file to the /etc/enigma2 folder
You can also export the channel list using the DreamboxEdit program.
6. Reboot the receiver