RAM for my PC..

dan-ger-ous

VIP Member
So i ran the crucial system scanner earlier and here are the results:

dfg0a1.jpg


The initial amount of RAM i wanted to upgrade to is 1GB, the second suggestion of 786mb i find to less and then next best solution is the 2GB + and i think thats to much and i wont be needing so much RAM. I was just wondering why did crucial suggest these two options, does that mean i cant just grab a 1GB, and stick it in along with my current 256mb?
 
So i ran the crucial system scanner earlier and here are the results:

dfg0a1.jpg


The initial amount of RAM i wanted to upgrade to is 1GB, the second suggestion of 786mb i find to less and then next best solution is the 2GB + and i think thats to much and i wont be needing so much RAM. I was just wondering why did crucial suggest these two options, does that mean i cant just grab a 1GB, and stick it in along with my current 256mb?

You can just get a new 1GB & move your 256 to slot 2 & put the new 1GB in slot 1

-
 
Alright Gman, just thought id ask, how come i have to move the 256mb slot over to the second slot so the 1GB can take its place?
 
G you can slap me down, but id say thats the place to put your biggest ram as the pc looks there 1st. fingers crossed im gettimg this.
 
I was initially going to buy this one:

1GB PC2700 DDR 333 1 GB PC 2700 PC2100 DESKTOP MEM RAM on eBay (end time 09-Sep-09 16:32:36 BST)

I thought id double check with the seller, and he provided me with a recommended link instead of the one i had initially chosen, he recommended that i buy this:

1GB-PC2700 333 DDR-DELL-HP-IBM-ASUS-POWER-MAC-G5-RAM - eBay (item 110409797239 end time Aug-30-09 17:44:08 PDT)

Looking at the description, its a low density ram stick, is that why its expensive? because less chips are used but with a higher quality than compared to higher density RAM?
 
Have a look at this Dan......

Many only consider SPEED when purchasing memory and often neglect an important fact that memory DENSITY is actually even more important!

So why memory DENSITY is so important? Is it related to your system when upgrading? The answer is YES!

If your system is designed for accepting DDR (Double Data Rate) memories of 184pin DIMM (usually desktops) or 200pin SODIMM (usually laptops) built, for your system to fully recognise 1GB capacity per memory slot, you need to use 'Low Density - 64Mx8 config' 1GB module. If you use 'High-Density - 128Mx4 config' 1GB module, your PC may only recognise it as HALF the size at 512MB or most of the time it will not work.
How to tell if your 1GB module is a low or high density module?

* All low density 1GB modules are made with 16 chips (8 chips on each side) using 64Mx8 device.
* All high density 1GB modules are made with 16 chips (8 chips on each side) using 128Mx4 device.

It costs memory manufacturers almost the same to produce Low Density 1GB modules which have 100% compatibility with all systems on the market, comparing to producing high density 1GB modules. So why would manufacturers be so foolish to produce high density 1GB modules which only have 10% compatibility with systems on the market? The reason is simple, because high density 1GB modules are mainly manufacturing process rejects/seconds that cannot be made as a low density modules. It is very much like Intel CPU, those CPU that cannot be made as Pentium 4 CPU become a slower bus Celeron CPU instead, by a down-binning process.
High Density module is by far much slower than Low Density module at same speed rating say PC3200/DDR400. A lot of users have fallen into attractive CHEAP PRICE trap by High Density module sellers and have complained that they are either VERY SLOW and/or will not run at all and sellers won't accept return!
High density modules are FAR CHEAPER, less than half the price when compare with low density modules and hence high density modules will NOT work on 90% of today's PC chipsets that require and can only use 'Low Density - 64Mx8 config' 1GB modules.
In summary:-

* LOW DENSITY modules have 100% compatibility with ALL systems and ALL chipsets.
* HIGH DENSITY modules only have 10% compatibility and are VERY SLOW.

This is also why almost all Branded-Name systems such as Apple/MAC, Compaq/HP, Dell and IBM only uses LOW DENSITY modules.
However 90% of eBay are plagued with High-Density 1GB modules at very low price, and you will be wasting your precious time and money having to return those high density 1GB modules to your seller for refund. So AVOID those 'High-Density - 128Mx4 config' 1GB modules which is usually UNBRANDED and is NO NAME!
 
Cheers, im trying to find out whether mines supports High density or low density. Dont know if i should pull out my current ram stick and have a look.
 
Ive read that crucial only sell low density rams, then the email from the 1st seller recommending that i buy the second product, the difference there was that it was low density, ill wait for the seller that im intending to buy off, see if he can confirm if it works, otherwise im buying it anyway. :)
 
cheers G, it then will look for extra ram from the other connection on the mother board.
 
Back
Top