Thanks Guys.... Doesent look like i have a use for the vuduo then...
Ive tried dsayers and bioheads images and must say they are PERFECT for the H2H. But I wanted to try Wooshbuild 5 see if it was ok?
So I Installed Wooshbuild 5.
Then Menu - Setup - Service Searching - Tuner Configuration - highlight tuner B - Ok - Then change Net ID to your area - then Green button to save.
Exit back to tv. Green button - Red button (remove plugins) - extensions - highlight autobouquets and press ok - (MESSAGE READS Do you want to remove the plugin "extensions-autobouquets"?) Highlight YES and press OK - exit back to tv - ****NOW THE IMPORTANT PART**** Menu - Standby/Restart - RESTART GUI ****It must be (RESTART GUI) and not just restart!!!!!! (If you press just restart Autobouqets E2 will still be there!!!!!!!!)
Green button - Green button (download plugins) - System Plugins - AutobouqetMaker (ABM) - Download then restart box - Menu - Standby/Restart - RESTART GUI.
Menu - Setup - Service Searching - Autobouqemaker - Configure - change setup mode to Expert - Sheduled scan (turn to ON) - change Time of Scan to Whatever time ( I used 5am) - Press Exit - Providers - make sure Virgin U.K. is (ON) - Virgin Swap Channels is (ON) and your Net Id for your area is there . - Press Exit - Start Scan ( Will now Scan for Channels).
Once finished then Menu - Setup - EPG - Settings - Enable Virgin epg ( change to YES the press GREEN button to Save.
Press Exit back to Setup - CrossEpg -Configure - Schedule Download ( change to wherever ( I used (5.15am).
Press Exit - XMLTV PROVIDERS - Sroll down to bottom and choose RYTEC Virgin U.K. XMLTV then press GREEN to enable - Press Yellow to Download - ( once finished make sure there's a tick on Ryteck virgin uk).
Press Exit.
Providers Start Order - Highlight Rytec Virgin and press GREEN button to move up so RYTEC virgin is at the top!
Press Exit - Download Now - Now will Download the Epg. where do i ger virgin skin?
Then I FTP into box using Filezilla and transferred my newcamd.list file into usr/keys.
Then Blue Button - Press Down Button once - Press Right Button once - (softcam Panel "control your softcams") - press OK - Highlight Select Cam 1 - Press Right Button Twice till it says mgcamd_1.38rl - press GREEN button this will restart cam. - now exit back to tv.
I then downloaded the VirginHD skin and Installed it aswell.
All Virgin Channels working fine including HD and Epg working g a treat!
If I've missed anything out or done something you thinks wrong guys let me know.
Things to NOTE:
1. I left TUNER A as it was.
2. Always check your using the correct NET ID.
3. I was using a N-line in Mgcamd. (But obviously you can use c:line CCCam).
4. This guide is for Cable ONLY!! But you can run Sky with this also.
5. Big thanks to Wooshman (Wooshbuild is a great build mate)
Might help someone if they fancy using Wooshbuild eh!
Hi, Is there a reliable site for the Cable (V-M) Network IDs
Thanks for this.
Thanks for this.
However I keep getting an error on all the channels after I have done an Autotune.
The error is
"Getting Event Info Failed
invalid null reference in method...."
Does anyone have any ideas. I have re-tuned 6 times now. Even the FTA channels have it.
Thanks
hi thanks for the install info working perfectIve tried dsayers and bioheads images and must say they are PERFECT for the H2H. But I wanted to try Wooshbuild 5 see if it was ok?
So I Installed Wooshbuild 5.
Then Menu - Setup - Service Searching - Tuner Configuration - highlight tuner B - Ok - Then change Net ID to your area - then Green button to save.
Exit back to tv. Green button - Red button (remove plugins) - extensions - highlight autobouquets and press ok - (MESSAGE READS Do you want to remove the plugin "extensions-autobouquets"?) Highlight YES and press OK - exit back to tv - ****NOW THE IMPORTANT PART**** Menu - Standby/Restart - RESTART GUI ****It must be (RESTART GUI) and not just restart!!!!!! (If you press just restart Autobouqets E2 will still be there!!!!!!!!)
Green button - Green button (download plugins) - System Plugins - AutobouqetMaker (ABM) - Download then restart box - Menu - Standby/Restart - RESTART GUI.
Menu - Setup - Service Searching - Autobouqemaker - Configure - change setup mode to Expert - Sheduled scan (turn to ON) - change Time of Scan to Whatever time ( I used 5am) - Press Exit - Providers - make sure Virgin U.K. is (ON) - Virgin Swap Channels is (ON) and your Net Id for your area is there . - Press Exit - Start Scan ( Will now Scan for Channels).
Once finished then Menu - Setup - EPG - Settings - Enable Virgin epg ( change to YES the press GREEN button to Save.
Press Exit back to Setup - CrossEpg -Configure - Schedule Download ( change to wherever ( I used (5.15am).
Press Exit - XMLTV PROVIDERS - Sroll down to bottom and choose RYTEC Virgin U.K. XMLTV then press GREEN to enable - Press Yellow to Download - ( once finished make sure there's a tick on Ryteck virgin uk).
Press Exit.
Providers Start Order - Highlight Rytec Virgin and press GREEN button to move up so RYTEC virgin is at the top!
Press Exit - Download Now - Now will Download the Epg.
Then I FTP into box using Filezilla and transferred my newcamd.list file into usr/keys.
Then Blue Button - Press Down Button once - Press Right Button once - (softcam Panel "control your softcams") - press OK - Highlight Select Cam 1 - Press Right Button Twice till it says mgcamd_1.38rl - press GREEN button this will restart cam. - now exit back to tv.
I then downloaded the VirginHD skin and Installed it aswell.
All Virgin Channels working fine including HD and Epg working g a treat!
If I've missed anything out or done something you thinks wrong guys let me know.
Things to NOTE:
1. I left TUNER A as it was.
2. Always check your using the correct NET ID.
3. I was using a N-line in Mgcamd. (But obviously you can use c:line CCCam).
4. This guide is for Cable ONLY!! But you can run Sky with this also.
5. Big thanks to Wooshman (Wooshbuild is a great build mate)
Might help someone if they fancy using Wooshbuild eh!
Ive tried dsayers and bioheads images and must say they are PERFECT for the H2H. But I wanted to try Wooshbuild 5 see if it was ok?
So I Installed Wooshbuild 5.
Then Menu - Setup - Service Searching - Tuner Configuration - highlight tuner B - Ok - Then change Net ID to your area - then Green button to save.
Exit back to tv. Green button - Red button (remove plugins) - extensions - highlight autobouquets and press ok - (MESSAGE READS Do you want to remove the plugin "extensions-autobouquets"?) Highlight YES and press OK - exit back to tv - ****NOW THE IMPORTANT PART**** Menu - Standby/Restart - RESTART GUI ****It must be (RESTART GUI) and not just restart!!!!!! (If you press just restart Autobouqets E2 will still be there!!!!!!!!)
Green button - Green button (download plugins) - System Plugins - AutobouqetMaker (ABM) - Download then restart box - Menu - Standby/Restart - RESTART GUI.
Menu - Setup - Service Searching - Autobouqemaker - Configure - change setup mode to Expert - Sheduled scan (turn to ON) - change Time of Scan to Whatever time ( I used 5am) - Press Exit - Providers - make sure Virgin U.K. is (ON) - Virgin Swap Channels is (ON) and your Net Id for your area is there . - Press Exit - Start Scan ( Will now Scan for Channels).
Once finished then Menu - Setup - EPG - Settings - Enable Virgin epg ( change to YES the press GREEN button to Save.
Press Exit back to Setup - CrossEpg -Configure - Schedule Download ( change to wherever ( I used (5.15am).
Press Exit - XMLTV PROVIDERS - Sroll down to bottom and choose RYTEC Virgin U.K. XMLTV then press GREEN to enable - Press Yellow to Download - ( once finished make sure there's a tick on Ryteck virgin uk).
Press Exit.
Providers Start Order - Highlight Rytec Virgin and press GREEN button to move up so RYTEC virgin is at the top!
Press Exit - Download Now - Now will Download the Epg.
Then I FTP into box using Filezilla and transferred my newcamd.list file into usr/keys.
Then Blue Button - Press Down Button once - Press Right Button once - (softcam Panel "control your softcams") - press OK - Highlight Select Cam 1 - Press Right Button Twice till it says mgcamd_1.38rl - press GREEN button this will restart cam. - now exit back to tv.
I then downloaded the VirginHD skin and Installed it aswell.
All Virgin Channels working fine including HD and Epg working g a treat!
If I've missed anything out or done something you thinks wrong guys let me know.
Things to NOTE:
1. I left TUNER A as it was.
2. Always check your using the correct NET ID.
3. I was using a N-line in Mgcamd. (But obviously you can use c:line CCCam).
4. This guide is for Cable ONLY!! But you can run Sky with this also.
5. Big thanks to Wooshman (Wooshbuild is a great build mate)
Might help someone if they fancy using Wooshbuild eh!
Hi, I wonder if anyone is willing to help?
So the story goes that I have a Zgemma Star H2 that was installed with Openvix and running Virgin Media package via cable for the last 18months.
I've just bought a new 12 month sub off another provider who suggested that I change to Wooshbuild V5.
I've installed Basebuild, flashed to wooshbuild and carried out all the steps as above with regards to autobouquetsmaker etc.
Incidentally I hadn't added my line to the USB when flasjing the box.
The issue I have now is that I don't know where exactly to enter my line? I don't have newcamd.list showing in usr/keys or anywhere else that I can see.
I have CCcam 2.3.0 showing in the Softcam Panel butr can't find it in Dreamexplorer in order to edit the line.
I've tried to FTP an old CCcam.cfg file that I had but that doesn't seem to be working.
Has anyone got any advice?
Basically I am a relative novice when it comes to tech etc. but I'm good at following instructions, especially if put down in an idiotproof format lol...
TIA for any assistance offered....