I cant do anything after it boots it shows wooshbuild 5 then a black screen tv says no signalAs stated wooshbuild 5 is way out of date have you got virmin tv or broadband in your house as the H2 is a cable box it could do with a reflash have you had it up and running have you been able to view channels 1-5 tried a rescan for channels got line details to receive channels other than 1-5
Have you got cable tuners connected in back of box is it connected to Internet don't do a factory reset on the box as it could completely brick itafter reboot it shows wooshbuild 5 then a black screen so I cant do any of your ideas is there a way of booting the box in factory mode
Even if it says no signal you can use the remote to get a menu up on screen so we know hdmi works.
Then its back to the cable tuner feed in correct port?
Needs reflashing with an upto date image put onto it did it come with a gift or line on ityep everything is in the right hole menu wont work or even pressing the green button nowt happens
Dowload an image for your box like openatv 6.2 willo build vix build groggs image extract the file from the zip file put the zgemma file onto usb stick pop it into rear USB port on box and power on should start to flash was the a line on the box for you to receive premium channelshow can I reflash it if the screen is black that's the problem
Its an image for cable boxes you can download open at 6.2 flash the box with that then install wooshbuild infinityyes it was but I have a copy of the line ,wots willo build
http://images2.mynonpublic.com/openatv/current/index.php?open=zgemmash2how can I reflash it if the screen is black that's the problem
Did you put it in rear USB and just put zgemma file onto ityes I now I am trying to get it to boot up ,when everything connected turn box on it boots shows wooshbuild 5 on screen then counter on box goes to 99 the screen goes black and that's that I have downloaded a new openatv 2 onto a usb but that does the same if you have any ideas let me knw
yes I formatted it to fat 32 then put openatv on it but still the same I think it might need bining unless you have any other ideasDid you put it in rear USB and just put zgemma file onto it
Zgemma boxes don't like certain types of usb stick have you got the right image for your box from air digital on open atv websiteyes I formatted it to fat 32 then put openatv on it but still the same I think it might need bining unless you have any other ideas