thanks very much
thanks very much
I have click in link and in top saying
The softcam control methods in OpenATV changed. If you have an image that is older than 03 May 2019, update or flash a newer one first.
can you please point me for the last openATV and wooshbuild version, I had a look, but I am not sure and I don't want to break the satellite .In my saying version 6.1,build 0 and kernel 4.4.35
Thanks again
Thanks.what is the easy way to do please?the box needs flashing
there's several ways of doing it, do you have a usb stick?
also you will need the ip address of the box, begins 192.168, you'll find this in menu>information>network, write it down as you will need this number at some stage
put the usb in the box and initialsie itThanks.what is the easy way to do please?
wget --no-check-certificate -O fla.sh http://flashmybox4.me && bash fla.sh
Thanksput the usb in the box and initialsie it
get the ip address of the box, begins 192.168, you'll find this in menu>information>network
open a browser window on pc
paste that ip address in address bar and click enter
click Terminal
type root, click enter
paste grogbuild command line in and click enter again:
Code:wget --no-check-certificate -O fla.sh http://flashmybox4.me && bash fla.sh
Thanks.it doesn't matter, initialising it formats it and mounts it ready for temp storage during flashing.
on laptop screen, when you put command line in, you will be asked questions, usually just yes/no answers, with regards to freesat, cable, iptv etc
if using cable, you'll need your VM netid, then sit back and the box flashes itself with today's image
Thanks.Thanks.
Can you please tell me which image should I used.
ATV or VIX?
Thanks.
I think I will go for WooshBuild.
Do you have the like Please?
opkg install http://wbuildx.co.uk/setup.ipk
The command line i posted above is for grogbuild because that flashes the latest openatv image, then adds grogbuild automatically, it's what i use.
If you wish to use wooshbuild, you need to flash openatv first, then add wooshbuild by using this command line in webif/terminal:
Code:opkg install http://wbuildx.co.uk/setup.ipk
Was very easy. Many thanksYou don't /need/ any build, lots of people just use basic openatv or openvix, using someone's build just adds the enhancements but you can make your own if you like
grogbuild and wooshbuild are both openatv with enhancements, there's different Vix builds in the resources section if you want to try them.
I only said use grogbuild because you asked for the easiest method
Was very easy. Many thanks
All done I am just search for the satellites to see what is like, however I am very happy so far.
Just for future reference, now I have the last openatv and grogbuild can I just add wooshbuild or I have to flash again?
Thanks.You'd need to flash basic openatv then add wooshbuild via command line if you wish to change although in reality there's little difference between grogbuild and wooshbuild
Thanks.
For now will keep grogbuild as I am very happy with..
Can I add lines from computer ?
I have see that but I prefer with usb or from computer as I have a fewYes, use filezilla to log into the box, but grogbuild has a plugin called add-a-line where you can use the remote to type in line details