Dish could be out slightly but I did a scan on
Might be out of alignment because I can scan and find it with good signal but it is encrypted.
Dish could be out slightly but I did a scan on
Might be out of alignment because I can scan and find it with good signal but it is encrypted.
According to lyngsat, it's clear in HD on 5w though on wide beam (70cm dish recommended)
Hi, I just scanned that Sat, tf1 isn't clear, there are about a dozen clear french channels,According to lyngsat, it's clear in HD on 5w though on wide beam (70cm dish recommended)
I wouldn't have found the football only for reading this post, strange commentary though, you can hear the English commentary in the background.
These are some of the channels available on Hotbird 13E with a Eurosub/gift.Thanks to everyone for replies and info, will be moving the dish tomorrow☺
Here are the photos you requested.Thanks to everyone for replies and info, will be moving the dish tomorrow☺
What do you actually need (besides a motor obviously) to motorise a satellite dish.
Any satellite receiver that you can put a line into, an 80-100cm dish, a Satellite installer to set the dish up properly (or do it youself), & a Euro sub. Set the receiver to Usals, put your Long/Lat positions in, & then spend hours sorting channels out, Hotbird has about 1500 channels, only around 80 or so are viewable with a Eurosub, of course there's no way of knowing how long that will last.
Just search this on ebay - Full Motorized System 80 CM DISH Free UK delivery only £55I understand the afterwards stuff i.e. the subs, got a box already, purely wanting to know what equipment I'd need to buy to motorise my dish.
Sorry, if you have a suitable dish then you just need the motor and fittings- either of these would do, (both on ebay).I understand the afterwards stuff i.e. the subs, got a box already, purely wanting to know what equipment I'd need to buy to motorise my dish.
Hi, just letting you know, you can get TF1 HD with a Eurosub, on Hotbird 13E (11681 H 27500), along with 11 other French channels.I have 19.2e running with line and some channels clear by some of the French ones (I think related to transponder Astra 1N) don't clear. I used to like watching French TF1 (ch.636) which now no longer clears.
Tried manually inputting tp and scan but doesn't work. Any idea what's going on? Worked at xmas when using the same line.