GrogBuild Grogbuild, TM Nano 3T combo, cannot flash kernel

Abu Baniaz

TK Veteran
@grog68
I am getting this error at the end of the process. The image on the box was OPenATV 6.2 2019-12-03

Code:
ofgwrite Utility v4.5.5
Author: Betacentauri
Based upon: mtd-utils-native-1.5.1 and busybox 1.24.1
Use at your own risk! Make always a backup before use!
Don't use it if you use multiple ubi volumes in ubi layer!

Flashing rootfs
Flashing kernel
Searching image files in ./ resolved to /media/hdd/backup_openatv_tmnano3t/latestforgrogbuild/update/force1plus
Found UBIFS rootfs
Found mounted /newroot

Found /proc/mtd entries:
Device:   Size:     Erasesize:  Name:                   Image:
mtd0:     0f500000  00020000    "rootfs"
mtd1:     0f500000  00020000    "rootfs(redundant)"
mtd2:     00a00000  00020000    "kernel"
mtd3:     00800000  00010000    "physmap-flash.0"
Using kernel mtd device: /dev/mtd2
Using rootfs mtd device: /dev/mtd0
Error: Cannot flash kernel, because no kernel file was found
[email protected]:~#
Complete Putty log also attached.

As an interim process, can you re-post the instructions without flashing the box.

If you are not using anything specific/custom to invoke ofgwrite, please let me know. I have BetaCentauri on my Skype contacts and can liaise with him. However, flashonline/image Manger works fine.

Just in case you need it
Code:
Welcome to openATV for tmnano3t
openatv 6.3 tmnano3t

tmnano3t login: root
Last login: Wed Dec 11 12:34:13 GMT 2019 on pts/0
[email protected]:~# cat /proc/mtd
dev:    size   erasesize  name
mtd0: 0f500000 00020000 "rootfs"
mtd1: 0f500000 00020000 "rootfs(redundant)"
mtd2: 00a00000 00020000 "kernel"
mtd3: 00800000 00010000 "physmap-flash.0"
[email protected]:~#
EDIT: I see the instructions are
Code:
wget -O $BACKUP_DIR/latestforgrogbuild/latestimage.zip $imageurl && unzip $BACKUP_DIR/latestforgrogbuild/latestimage.zip -d $BACKUP_DIR/latestforgrogbuild/ && cd $(find $BACKUP_DIR/latestforgrogbuild/  -type d  -maxdepth 2 2> /dev/null|sed '$!d') && ofgwrite  -r -k $( [[ ! -z "$MULTIBOOT" ]] && printf %s '-m'$MULTIBOOT' ')./
There is an extra space before "- r", but that should not matter. I have sent BetaCenatauri a message
 

Attachments

Last edited:

grog68

VIP Member
Forum Supporter
this has been reported by someone else with a different box and they ended up flashing an older blank atv (6.1) and then ran the setup and it flashed fine.

I really don't know what the issue is, basically the script is just downloading and unzipping the latest image and then using ofgwrite to flash. It looks like ofgwrite isn't liking the downloaded image
 

pabloescaban

VIP Member
Forum Supporter
OK, maybe an issue with ofgwrite changes. We'll soon find out.

Can you psot teh other script you deleted please?
Grog's original script?
Code:
wget --no-check-certificate -O ~/grogbuild-atv.sh http://www.dropbox.com/s/z8wqyrb1ig7vepd/grogbuild-atv.sh?dl=1 && chmod 744 ~/grogbuild-atv.sh && ~/grogbuild-atv.sh
 

Abu Baniaz

TK Veteran
Just for info, the flash ATV by command line is not working too.

Would you know what version of ofgwrite the other person used? Will help to track down what changes could have caused it.
 

Abu Baniaz

TK Veteran
Grog's original script?
Code:
wget --no-check-certificate -O ~/grogbuild-atv.sh http://www.dropbox.com/s/z8wqyrb1ig7vepd/grogbuild-atv.sh?dl=1 && chmod 744 ~/grogbuild-atv.sh && ~/grogbuild-atv.sh
Thanks, but that file is not on drop box

Maybe someone will have the grogbuild-atv.sh on their PC.
 

grog68

VIP Member
Forum Supporter
Code:
https://www.dropbox.com/s/mi1irvk2m07f489/grogbuild-atv.sh?dl=1
try that, I have two on there grogbuild-atv and then grogbuild-atv-new but the new one is older than the other so anyones guess as to which is the one to use now lol.

Edit: Note that this one won't have things like E2istream installed as I've not updated this script in a long time
 
Last edited:

Abu Baniaz

TK Veteran
When the image is inflated, there is a sub-directory. Betacentauri said ofgwrite does not check for sub-directories.

Code:
Searching image files in ./ resolved to /media/hdd/atvimage/update/force1plus
Code:
Searching image files in /media/hdd/atvimage/update/force1plus/cfe resolved to /media/hdd/atvimage/update/force1plus/cfe
Manually invoked it and flashed on line 116

Code:
=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2019.12.11 18:58:16 =~=~=~=~=~=~=~=~=~=~=~=


Welcome to openATV for tmnano3t

openatv 6.3 tmnano3t



tmnano3t login: root
[email protected]:~# wget --no-check-certificate -O installatv.sh https://www.dropbox.com/s/nqbo698rxconave/installatv.sh?dl=1 && bash installatv.sh
--2019-12-11 18:59:47--  https://www.dropbox.com/s/nqbo698rxconave/installatv.sh?dl=1
Resolving www.dropbox.com... 162.125.8.1, 2620:100:6020:1::a27d:4001
Connecting to www.dropbox.com|162.125.8.1|:443... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: /s/dl/nqbo698rxconave/installatv.sh [following]
--2019-12-11 18:59:48--  https://www.dropbox.com/s/dl/nqbo698rxconave/installatv.sh
Reusing existing connection to www.dropbox.com:443.
HTTP request sent, awaiting response... 302 Found
Location: https://uce02a9e84931e3ccb4945a2e12e.dl.dropboxusercontent.com/cd/0/get/AuA7tiuQZLiLeg66AE7rv7yX5Y5A9dyfSdAjKgAgK1PRYs1zzTH4mcwCewdnpRUBi_fvuUs-Bn4ZlsetNFXmNkZ2alULc0ZOFOmLMwO00m_1ZQ/file?dl=1# [following]
--2019-12-11 18:59:48--  https://uce02a9e84931e3ccb4945a2e12e.dl.dropboxusercontent.com/cd/0/get/AuA7tiuQZLiLeg66AE7rv7yX5Y5A9dyfSdAjKgAgK1PRYs1zzTH4mcwCewdnpRUBi_fvuUs-Bn4ZlsetNFXmNkZ2alULc0ZOFOmLMwO00m_1ZQ/file?dl=1
Resolving uce02a9e84931e3ccb4945a2e12e.dl.dropboxusercontent.com... 162.125.64.6, 2620:100:6020:6::a27d:4006
Connecting to uce02a9e84931e3ccb4945a2e12e.dl.dropboxusercontent.com|162.125.64.6|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 896 [application/binary]
Saving to: ‘installatv.sh’


installatv.sh                                       0%[                                                                                                              ]       0  --.-KB/s              
installatv.sh                                     100%[=============================================================================================================>]     896  --.-KB/s    in 0s     

2019-12-11 18:59:49 (23.3 MB/s) - ‘installatv.sh’ saved [896/896]

You are about to flash your tmnano3t box with the latest stable image of ATV
If using multiboot box please enter partition to flash:
--2019-12-11 18:59:57--  http://images.mynonpublic.com/openatv/current/tmnano3t/openatv-6.3-tmnano3t-20191211_usb.zip
Resolving images.mynonpublic.com... 136.243.69.212, 176.9.45.237
Connecting to images.mynonpublic.com|136.243.69.212|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 95399856 (91M) [application/zip]
Saving to: ‘latestatv’


latestatv                                           0%[                                                                                                              ]       0  --.-KB/s              
latestatv                                           0%[                                                                                                              ] 493.21K  2.41MB/s              
latestatv                                           3%[==>                                                                                                           ]   2.87M  7.17MB/s              
latestatv                                           5%[====>                                                                                                         ]   4.66M  6.75MB/s              
latestatv                                           9%[=========>                                                                                                    ]   9.04M  10.1MB/s              
latestatv                                          12%[=============>                                                                                                ]  11.70M  10.7MB/s              
latestatv                                          15%[===============>                                                                                              ]  13.73M  9.88MB/s              
latestatv                                          19%[====================>                                                                                         ]  18.11M  11.4MB/s              
latestatv                                          21%[======================>                                                                                       ]  19.58M  10.9MB/s              
latestatv                                          24%[==========================>                                                                                   ]  22.63M  10.9MB/s              
latestatv                                          29%[===============================>                                                                              ]  26.99M  11.8MB/s              
latestatv                                          31%[=================================>                                                                            ]  28.76M  11.6MB/s              
latestatv                                          34%[=====================================>                                                                        ]  31.61M  11.6MB/s              
latestatv                                          38%[=========================================>                                                                    ]  35.45M  12.1MB/s              
latestatv                                          39%[==========================================>                                                                   ]  36.32M  11.6MB/s    eta 5s    
latestatv                                          44%[================================================>                                                             ]  40.61M  11.9MB/s    eta 5s    
latestatv                                          48%[====================================================>                                                         ]  44.48M  12.8MB/s    eta 5s    
latestatv                                          49%[=====================================================>                                                        ]  45.09M  12.4MB/s    eta 5s    
latestatv                                          53%[=========================================================>                                                    ]  48.38M  12.6MB/s    eta 5s    
latestatv                                          54%[===========================================================>                                                  ]  49.92M  12.8MB/s    eta 3s    
latestatv                                          59%[================================================================>                                             ]  54.06M  12.8MB/s    eta 3s    
latestatv                                          60%[=================================================================>                                            ]  55.06M  12.7MB/s    eta 3s    
latestatv                                          63%[=====================================================================>                                        ]  58.09M  12.6MB/s    eta 3s    
latestatv                                          68%[==========================================================================>                                   ]  62.59M  12.3MB/s    eta 3s    
latestatv                                          73%[===============================================================================>                              ]  66.70M  12.8MB/s    eta 2s    
latestatv                                          74%[================================================================================>                             ]  67.76M  12.8MB/s    eta 2s    
latestatv                                          78%[=====================================================================================>                        ]  71.56M  12.4MB/s    eta 2s    
latestatv                                          82%[==========================================================================================>                   ]  75.39M  12.8MB/s    eta 2s    
latestatv                                          83%[===========================================================================================>                  ]  76.31M  12.5MB/s    eta 2s    
latestatv                                          88%[================================================================================================>             ]  80.57M  12.5MB/s    eta 1s    
latestatv                                          92%[====================================================================================================>         ]  84.22M  12.8MB/s    eta 1s    
latestatv                                          93%[=====================================================================================================>        ]  85.05M  12.5MB/s    eta 1s    
latestatv                                          98%[===========================================================================================================>  ]  89.55M  12.4MB/s    eta 1s    
latestatv                                         100%[=============================================================================================================>]  90.98M  13.3MB/s    in 7.3s   

2019-12-11 19:00:04 (12.5 MB/s) - ‘latestatv’ saved [95399856/95399856]

Archive:  latestatv.zip
  inflating: update/force1plus/cfe/imageversion
  inflating: update/force1plus/cfe/oe_kernel.bin
  inflating: update/force1plus/cfe/oe_rootfs.bin
  inflating: update/force1plus/cfe/splash1.bmp
  inflating: update/force1plus/cfe/splash2.bmp
  inflating: update/force1plus/cfe/splash3.bmp
  inflating: update/force1plus/cfe/splash.bmp

ofgwrite Utility v4.5.5
Author: Betacentauri
Based upon: mtd-utils-native-1.5.1 and busybox 1.24.1
Use at your own risk! Make always a backup before use!
Don't use it if you use multiple ubi volumes in ubi layer!

Flashing rootfs
Flashing kernel
Searching image files in ./ resolved to /media/hdd/atvimage/update/force1plus
Found UBIFS rootfs
Found mounted /newroot

Found /proc/mtd entries:
Device:   Size:     Erasesize:  Name:                   Image:
mtd0:     0f500000  00020000    "rootfs"         
mtd1:     0f500000  00020000    "rootfs(redundant)"
mtd2:     00a00000  00020000    "kernel"         
mtd3:     00800000  00010000    "physmap-flash.0"
Using kernel mtd device: /dev/mtd2
Using rootfs mtd device: /dev/mtd0
Error: Cannot flash kernel, because no kernel file was found


[email protected]:~# ofgwrite -r -k /media/hdd/atvimage/update/force1plus/cfe
mkdir: can't create directory '/newroot': File exists

ofgwrite Utility v4.5.5
Author: Betacentauri
Based upon: mtd-utils-native-1.5.1 and busybox 1.24.1
Use at your own risk! Make always a backup before use!
Don't use it if you use multiple ubi volumes in ubi layer!

Flashing rootfs
Flashing kernel
Searching image files in /media/hdd/atvimage/update/force1plus/cfe resolved to /media/hdd/atvimage/update/force1plus/cfe
Found kernel file: /media/hdd/atvimage/update/force1plus/cfe/oe_kernel.bin
Found rootfs file: /media/hdd/atvimage/update/force1plus/cfe/oe_rootfs.bin
Found UBIFS rootfs
Found mounted /newroot
Found mounted /newroot
Found mountpoint for rootfs file: /media/hdd

Found /proc/mtd entries:
Device:   Size:     Erasesize:  Name:                   Image:
mtd0:     0f500000  00020000    "rootfs"            ->  /media/hdd/atvimage/update/force1plus/cfe/oe_rootfs.bin
mtd1:     0f500000  00020000    "rootfs(redundant)"
mtd2:     00a00000  00020000    "kernel"            ->  /media/hdd/atvimage/update/force1plus/cfe/oe_kernel.bin
mtd3:     00800000  00010000    "physmap-flash.0"
Using kernel mtd device: /dev/mtd2
Using rootfs mtd device: /dev/mtd0

sh: /etc/init.d/softcam: No such file or directory
killall: CCcam: no process killed

Usage:
kill [options] <pid> [...]

Options:
<pid> [...]            send signal to every <pid> listed
-<signal>, -s, --signal <signal>
                        specify the <signal> to be sent
-l, --list=[<signal>]  list all signal names, or convert one to a name
-L, --table            list all signal names in a nice table

-h, --help     display this help and exit
-V, --version  output version information and exit

For more details see kill(1).

Usage:
kill [options] <pid> [...]

Options:
<pid> [...]            send signal to every <pid> listed
-<signal>, -s, --signal <signal>
                        specify the <signal> to be sent
-l, --list=[<signal>]  list all signal names, or convert one to a name
-L, --table            list all signal names in a nice table

-h, --help     display this help and exit
-V, --version  output version information and exit

For more details see kill(1).
killall: kodi.bin: no process killed
killall: hddtemp: no process killed
killall: transmission-daemon: no process killed
killall: openvpn: no process killed
sh: /etc/init.d/sabnzbd: No such file or directory
Stopping automount: done.
Syncing filesystem
daemonize
successful
start umount_rootfs
[email protected]:~# cp: can't stat '/lib/libcrypt*': No such file or directory
Switching to user mode 2
Checking E2 is running...
Execute: ps
E2 still running
Execute: ps
E2 still running
Execute: ps
E2 is stopped
Move mountpoint of image files
Moving /oldroot/media/hdd to /media/hdd
umounting: /media/autofs
umounting: /proc/fs/nfsd
umounting: /sys/fs/fuse/connections
umounting: /media
umounting: /sys/kernel/debug
failed to to open old config /etc/default/autofs
/bin/automount: program is already running.
Execute: fuser -k -m /oldroot/
 

grog68

VIP Member
Forum Supporter
hmm so they are not using the traditional /zgemma/h3 type structure

why is there an update folder if it's a new flash?
 

grog68

VIP Member
Forum Supporter
actually this bit of code should move to the correct folder

Code:
cd $(find $BACKUP_DIR/latestforgrogbuild/  -type d  -maxdepth 2 2> /dev/null|sed '$!d')
The name of the folders is irrelevant, it just assumes there a two sub directories ie update/force1plus it doesn't allow for the 3rd folder /cfe

I have changed the code above in the script so it goes down a max of 4 tiers of folder, so it should work now
 

Abu Baniaz

TK Veteran
No joy still

Code:
Welcome to openATV for tmnano3t
openatv 6.3 tmnano3t

tmnano3t login: root
[email protected]:~#  wget --no-check-certificate -O installatv.sh https://www.dropbox.com/s/nqbo698rxconave/installatv.sh?dl=1 && bash installatv.sh
--2019-12-11 22:18:55--  https://www.dropbox.com/s/nqbo698rxconave/installatv.sh?dl=1
Resolving www.dropbox.com... 162.125.64.1, 2620:100:6020:1::a27d:4001
Connecting to www.dropbox.com|162.125.64.1|:443... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: /s/dl/nqbo698rxconave/installatv.sh [following]
--2019-12-11 22:18:56--  https://www.dropbox.com/s/dl/nqbo698rxconave/installatv.sh
Reusing existing connection to www.dropbox.com:443.
HTTP request sent, awaiting response... 302 Found
Location: https://ucd7ed8d7604516cf618214558fb.dl.dropboxusercontent.com/cd/0/get/AuA5remF_mW7-xKkBBKksxn_z-bEuXCFHF0OY4TSWRAFHiS_oJ5qBQynkQiEJVMu82GKuGeHRfdTodGTmvvQG6lo1h8W5PmUz0I6X6SYpBs5Bw/file?dl=1# [following]
--2019-12-11 22:18:56--  https://ucd7ed8d7604516cf618214558fb.dl.dropboxusercontent.com/cd/0/get/AuA5remF_mW7-xKkBBKksxn_z-bEuXCFHF0OY4TSWRAFHiS_oJ5qBQynkQiEJVMu82GKuGeHRfdTodGTmvvQG6lo1h8W5PmUz0I6X6SYpBs5Bw/file?dl=1
Resolving ucd7ed8d7604516cf618214558fb.dl.dropboxusercontent.com... 162.125.64.6, 2620:100:6020:6::a27d:4006
Connecting to ucd7ed8d7604516cf618214558fb.dl.dropboxusercontent.com|162.125.64.6|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 896 [application/binary]
Saving to: ‘installatv.sh’

installatv.sh                                     100%[=============================================================================================================>]     896  --.-KB/s    in 0s

2019-12-11 22:18:57 (19.5 MB/s) - ‘installatv.sh’ saved [896/896]

You are about to flash your tmnano3t box with the latest stable image of ATV
If using multiboot box please enter partition to flash:
--2019-12-11 22:19:00--  http://images.mynonpublic.com/openatv/current/tmnano3t/openatv-6.3-tmnano3t-20191211_usb.zip
Resolving images.mynonpublic.com... 136.243.69.212, 176.9.45.237
Connecting to images.mynonpublic.com|136.243.69.212|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 95399856 (91M) [application/zip]
Saving to: ‘latestatv’

latestatv                                         100%[=============================================================================================================>]  90.98M  13.3MB/s    in 7.1s

2019-12-11 22:19:07 (12.9 MB/s) - ‘latestatv’ saved [95399856/95399856]

Archive:  latestatv.zip
  inflating: update/force1plus/cfe/imageversion
  inflating: update/force1plus/cfe/oe_kernel.bin
  inflating: update/force1plus/cfe/oe_rootfs.bin
  inflating: update/force1plus/cfe/splash1.bmp
  inflating: update/force1plus/cfe/splash2.bmp
  inflating: update/force1plus/cfe/splash3.bmp
  inflating: update/force1plus/cfe/splash.bmp

ofgwrite Utility v4.5.5
Author: Betacentauri
Based upon: mtd-utils-native-1.5.1 and busybox 1.24.1
Use at your own risk! Make always a backup before use!
Don't use it if you use multiple ubi volumes in ubi layer!

Flashing rootfs
Flashing kernel
Searching image files in ./ resolved to /media/hdd/atvimage/update/force1plus
Found UBIFS rootfs
Found mounted /newroot

Found /proc/mtd entries:
Device:   Size:     Erasesize:  Name:                   Image:
mtd0:     0f500000  00020000    "rootfs"
mtd1:     0f500000  00020000    "rootfs(redundant)"
mtd2:     00a00000  00020000    "kernel"
mtd3:     00800000  00010000    "physmap-flash.0"
Using kernel mtd device: /dev/mtd2
Using rootfs mtd device: /dev/mtd0
Error: Cannot flash kernel, because no kernel file was found
[email protected]:~#
 

Abu Baniaz

TK Veteran
The file matched what I had before, so maybe not yet uploaded? I edited the file manually and executed it. It flashed. Thanks.

Am I doing the wrong file? Flash vs Grog.
 

Abu Baniaz

TK Veteran
The file matched what I had before, so maybe not yet uploaded? I edited the file manually and executed it. It flashed. Thanks.

Am I doing the wrong file? Flash vs Grog.
Just to confirm that the grogbuild script now works. It sits at 28% for a while before rebooting.

Thanks @grog68.

Hopefully the flash file will be updated too.
 

grog68

VIP Member
Forum Supporter
sorry it was the main script I changed - the flashmybox4.me script, not the installatv.sh script.

I've just updated the installatv script
 

edm4ek

Registered
@grog68
Hello, I am writing here because I have a similar issue.

I am trying to see how Grobbuild works but I am running into issues. I watched the youtube video, went to the site and started.

I used the code in the site. This is my error I got from terminal:

zgemmah92s login: root
[email protected]:~# wget --no-check-certificate -O fla.sh http://flashmybox4.me && bash fla.sh
--2020-01-15 07:01:16-- http://flashmybox4.me/
Resolving flashmybox4.me... 91.121.192.18
Connecting to flashmybox4.me|91.121.192.18|:80... connected.
HTTP request sent, awaiting response... 302 Found
Location: http://flashmybox4.me/fla.sh [following]
--2020-01-15 07:01:16-- http://flashmybox4.me/fla.sh
Reusing existing connection to flashmybox4.me:80.
HTTP request sent, awaiting response... 200 OK
Length: 24287 (24K) [application/octet-stream]
Saving to: ‘fla.sh’

fla.sh 100%[=========================================>] 23.72K --.-KB/s in 0.01s

2020-01-15 07:01:16 (1.72 MB/s) - ‘fla.sh’ saved [24287/24287]

Please wait while the necessary files are downloaded.
--2020-01-15 07:01:20-- http://www.softrix.co.uk/istream/installer.sh
Resolving www.softrix.co.uk... 217.160.0.170, 2001:8d8:100f:f000::2ab
Connecting to www.softrix.co.uk|217.160.0.170|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 734 [text/x-sh]
Saving to: ‘e2stream.sh’

e2stream.sh 100%[=========================================>] 734 --.-KB/s in 0s

2020-01-15 07:01:20 (33.3 MB/s) - ‘e2stream.sh’ saved [734/734]

echo "# e2iStream INSTALLED SUCCESSFULLY #"
echo "#########################################################"
echo "# BOX IS REBOOTING #"
echo "#########################################################"
reboot
exit 0
--2020-01-15 07:01:28-- http://www.softrix.co.uk/istream/downloads/e2istream_pythonX.X.tar.gz
Resolving www.softrix.co.uk... 217.160.0.170, 2001:8d8:100f:f000::2ab
Connecting to www.softrix.co.uk|217.160.0.170|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 7169493 (6.8M) [application/gzip]
Saving to: ‘e2istream_pythonX.X.tar.gz’

e2istream_pythonX.X.tar.gz 100%[=========================================>] 6.84M 3.62MB/s in 1.9s

2020-01-15 07:01:30 (3.62 MB/s) - ‘e2istream_pythonX.X.tar.gz’ saved [7169493/7169493]

*************************************************************************
* *
* if you like Grogbuild FreeRange with it's simple install and *
* you would like to donate to cover the costs of hosting and coding *
* then donations can be sent via paypal to [email protected] *
* Thanks for your support *
* *
*************************************************************************



************************************


1) ATV
2) VIX
Which base image do you want to use?1
Your installtion of Grogbuild FreeRange will be built on OpenATV


**************************************************************************
If using multiboot box please enter partition to flash:


**************************************************************************


1) UK
2) Ireland
Where are you located?1
UK


**************************************************************************


Do you want to keep your timers and line? [Y/N] n


**************************************************************************
Your box hostame is currently set to zgemmah92s, enter a new hostname or just press enter to keep as it is :
your box hostname will stay as zgemmah92s as you didn't enter a new hostname for your box


**************************************************************************
1) Atherstone_HD 17) Humber_HD 33) Ridge_Hill_HD
2) Border_England_HD 18) London_HD 34) Scarborough_HD
3) Border_Scotland_HD 19) London_/_Essex_HD 35) Scottish_East_HD
4) Brighton_HD 20) London_Kent_HD 36) Scottish_West_HD
5) Central_Midlands_HD 21) London_/_Thames_Valley_HD 37) Sheffield_HD
6) Channel_Isles_HD 22) Meridian_East_HD 38) South_Lakeland_HD
7) Dundee_HD 23) Meridian_North_HD 39) South_Yorkshire_HD
8) East_Midlands_HD 24) Meridian_South_HD 40) Tees_HD
9) Essex_HD 25) Meridian_South_East_HD 41) Thames_Valley_HD
10) Gloucester_HD 26) Merseyside_HD 42) Tring_HD
11) Grampian_HD 27) Norfolk_HD 43) Tyne_HD
12) Granada_HD 28) North_East_Midlands_HD 44) Wales_HD
13) Henley_On_Thames_HD 29) North_West_Yorkshire_HD 45) West_Anglia_HD
14) HTV_Wales_HD 30) North_Yorkshire_HD 46) West_Dorset_HD
15) HTV_West_HD 31) Northern_Ireland_HD 47) Westcountry_HD
16) HTV_West_/_Thames_Valley_HD 32) Oxford_HD
Select your SKY region from the list bellow by entering the number to the left of your selection, select 0 if
you don't want SKY enabled?12
You picked Granada HD, this will now be set in your autobouquets maker providers list.
1) BBC_London/ITV_London 26) BBC_S_East/ITV_Meridian_E
2) BBC_East_(W)/ITV_Anglia_W 27) BBC_S_East/ITV_London
3) BBC_East_(W)/ITV_Central_S 28) BBC_South/ITV_Meridian_S
4) BBC_East_(W)/ITV_Anglia_W 29) BBC_South/ITV_Meridian_SE
5) BBC_W_Mids/ITV_Central_W 30) BBC_South/ITV_W_Country
6) BBC_W_Mids/ITV_Central_SW 31) BBC_South/ITV_London
7) BBC_N_West/ITV_Granada 32) BBC_South/ITV_Meridian_N
8) BBC_N_West/ITV_BorderEng 33) BBC_S_West/ITV_W_Country
9) BBC_EYrks&amp;Lin/ITV_Yorkshire_E 34) BBC_NE_&amp;_C/ITV_BorderEng
10) BBC_Yorkshire/ITV_Yorkshire_W 35) BBC_NE_&amp;_C/ITV_Tyne_Tees_N
11) BBC_Yorkshire/ITV_Yorkshire_W 36) BBC_NE_&amp;_C/ITV_Tyne_Tees_S
12) BBC_Yorkshire/ITV_Tyne_Tees_S 37) BBC_Oxford/ITV_Central_S
13) BBC_E_Midlands/ITV_Central_E 38) BBC_Oxford/ITV_London
14) BBC_E_Midlands/ITV_Central_W 39) BBC_N_West/ITV_Granada
15) BBC_E_Midlands/ITV_Central_E 40) BBC_Yorkshire/ITV_Yorkshire_W
16) BBC_E_Midlands/ITV_Yorkshire_E 41) BBC_Channel_Is/ITV_Channel_Is
17) BBC_East_(E)/ITV_Anglia_S 42) BBC_Yorkshire/ITV_Yorkshire_E
18) BBC_East_(E)/ITV_London 43) BBC_Isle_of_Man
19) BBC_East_(E)/ITV_Anglia_E 44) BBC_Scotland/ITV_Grampian
20) BBC_West/ITV_West 45) BBC_Scotland/ITV_Grampian
21) BBC_West/ITV_Central_S 46) BBC_Scotland/ITV_BorderSco
22) BBC_West/ITV_Meridian_N 47) BBC_Scotland/ITV_Scot_(Glasgow)
23) BBC_West/ITV_Meridian_N 48) BBC_Scotland/ITV_Scot_(Edinburgh)
24) BBC_S_East/ITV_Meridian_S 49) BBC_Wales
25) BBC_S_East/ITV_Meridian_SE 50) BBC_Northern_Ireland
Select your FREESAT region from the list above by entering the number to the left of your selection, select 0
if you don't want FREESAT enabled?7
You picked BBC N West/ITV Granada, this will now be set in your autobouquets maker providers list.
sat_282_sky_uk:hdcustom_granada:BOUQUETS:|sat_282_freesat:hd_freesat_110_7:1:


**************************************************************************
1) All4One
2) e2m3u2Bouquet
3) None
If you have an IPTV subscription do you wish to set up one of these plugins?3


**************************************************************************
1) slyk-1-hd 3) slyk-q 5) vskin-bolt 7) vskin-hd 9) vskin-red-1080
2) slyk-1080 4) vskin-1080 6) vskin-bolt-1080 8) vskin-red 10) Default skin
Which skin do you want to use?2
You picked slyk-1080, it will now be set as your primary skin.


**************************************************************************
Sit back and put your feet up while I download the base image from http://images.mynonpublic.com/openatv/curre
nt/zgemmah92s/openatv-6.3-zgemmah92s-20200114_usb.zip and flash you box.
* *
*************************************************************************
* *
* if you like Grogbuild FreeRange with it's simple install and *
* you would like to donate to cover the costs of hosting and coding *
* then donations can be sent via paypal to [email protected] *
* Thanks for your support *
* *
*************************************************************************



--2020-01-15 07:12:57-- http://images.mynonpublic.com/openatv/current/zgemmah92s/openatv-6.3-zgemmah92s-20200
114_usb.zip
Resolving images.mynonpublic.com... 176.9.45.237, 136.243.69.212
Connecting to images.mynonpublic.com|176.9.45.237|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 214075283 (204M) [application/zip]
Saving to: ‘/media/hdd/backup_openatv_zgemmah92s/latestforgrogbuild/latestimage.zip’

/media/hdd/backup_openatv_z 100%[=========================================>] 204.16M 3.70MB/s in 2m 1s

2020-01-15 07:14:59 (1.68 MB/s) - ‘/media/hdd/backup_openatv_zgemmah92s/latestforgrogbuild/latestimage.zip’ sa
ved [214075283/214075283]

Archive: /media/hdd/backup_openatv_zgemmah92s/latestforgrogbuild/latestimage.zip
inflating: bootargs.bin
inflating: fastboot.bin
creating: h9/
inflating: h9/imageversion
inflating: h9/bootargs.bin
inflating: h9/rootfs.ubi
inflating: h9/noforce
inflating: h9/logo.img
inflating: h9/pq_param.bin
inflating: h9/rootfs.tar.bz2
inflating: h9/fastboot.bin
inflating: h9/baseparam.img
inflating: h9/uImage

ofgwrite Utility v4.5.5
Author: Betacentauri
Based upon: mtd-utils-native-1.5.1 and busybox 1.24.1
Use at your own risk! Make always a backup before use!
Don't use it if you use multiple ubi volumes in ubi layer!

Flashing rootfs
Flashing kernel
Searching image files in ./ resolved to /media/hdd/backup_openatv_zgemmah92s/latestforgrogbuild/h9
Found rootfs file: /media/hdd/backup_openatv_zgemmah92s/latestforgrogbuild/h9/rootfs.ubi
Found kernel file: /media/hdd/backup_openatv_zgemmah92s/latestforgrogbuild/h9/uImage
Found rootfs file: /media/hdd/backup_openatv_zgemmah92s/latestforgrogbuild/h9/rootfs.tar.bz2
Found UBIFS rootfs
Found mounted /newroot
Found mountpoint for rootfs file: /media/hdd

Found /proc/mtd entries:
Device: Size: Erasesize: Name: Image:
mtd0: 00100000 00020000 "boot"
mtd1: 00100000 00020000 "bootargs"
mtd2: 00100000 00020000 "baseparam"
mtd3: 00100000 00020000 "pqparam"
mtd4: 00100000 00020000 "logo"
mtd5: 00100000 00020000 "deviceinfo"
mtd6: 01000000 00020000 "kernel" -> /media/hdd/backup_openatv_zgemmah92s/latestforgrogbuil
d/h9/uImage
mtd7: 0ea00000 00020000 "rootfs" -> /media/hdd/backup_openatv_zgemmah92s/latestforgrogbuil
d/h9/rootfs.tar.bz2
Using kernel mtd device: /dev/mtd6
Using rootfs mtd device: /dev/mtd7

killall: CCcam: no process killed

Usage:
kill [options] <pid> [...]

Options:
<pid> [...] send signal to every <pid> listed
-<signal>, -s, --signal <signal>
specify the <signal> to be sent
-l, --list=[<signal>] list all signal names, or convert one to a name
-L, --table list all signal names in a nice table

-h, --help display this help and exit
-V, --version output version information and exit

For more details see kill(1).

Usage:
kill [options] <pid> [...]

Options:
<pid> [...] send signal to every <pid> listed
-<signal>, -s, --signal <signal>
specify the <signal> to be sent
-l, --list=[<signal>] list all signal names, or convert one to a name
-L, --table list all signal names in a nice table

-h, --help display this help and exit
-V, --version output version information and exit

For more details see kill(1).
killall: kodi.bin: no process killed
killall: hddtemp: no process killed
killall: transmission-daemon: no process killed
killall: openvpn: no process killed
sh: /etc/init.d/sabnzbd: No such file or directory
Stopping automount: done.
Syncing filesystem
daemonize
successful
start umount_rootfs
[email protected]:~# cp: can't stat '/lib/libcrypt*': No such file or directory
Switching to user mode 2


PLEASE WHAT DO I NEED TO DO???
 

pabloescaban

VIP Member
Forum Supporter
Nothing, when it gets to 'user mode2' you wait for 10-15 mins and the box will complete and reboot and it'll be done
 
Top