What's new
By:

Guide How to set up an E2 combo box with vix image

bees said:
dsayers2014 said:
thanks for the great guide after following this for the initial setup ive managed to configure my box to only have one set of bouquets rather than 2 by replacing all of the dead sky hd channels with virgin
Click to expand...

When Autobouquet maker updates over night won't it just return to the standard bouquets ?
Click to expand...

No I've edited a custom xml to cooperate with autobouquete marker http://www.techkings.org/zgemma-star-h-2h/90621-dsayers2014-vix3-2037-h2h-one-set-bouquets.html it took a while to amend it because it was an old one and had a few issues with it but now running great
 
The build itsef is fantastic but can anyone tell me how to put the line on the box as struggling cause box wont show up on my network where as all my ZGemma2s do
ANY IDEAS PLEASE !!!!!!!


Where it says enter ip address is it the Router / The box or your computer I am stuck here ????
 
Last edited by a moderator:
Used bees tut last night brilliant help would have been lost without it, keep up the good work also big shout to cactikid for his help
 
They do a single tuner cable and single tuner sat box, you only get tuner B if it's a twin tuner

The guide is for a "combo" so it shows how to set up both.

Just leave out the parts you don't need
 
The hybrid model is a cable box

You will need one of these

F connector.jpg
 
Thanks yes i have bought one of those,, set the tuner to dvb-c but when i try to scan it says Error -failed to scan (error starting scanning)! can you help ?
 
You would be best starting your own thread instead of tagging on the end of this one.

You need to give as much information as to where you got to in the guide.

For example, did you put in your net id in tuner configuration, did you set your area in "provider"
are you scanning with ABM ?

If you are specific we can pin point the problem quicker.
 
So have you now got BBC 1 BBC 2 ITV and a couple of others showing ?

Blank screen on all the rest ?

Have a look here

Top left under the Techkings sign "Post New Thread" button
 
Last edited:
Just picked up an EVO Enfinity T2/Cable Receiver, all setup and good to go

Just need help with entering the N line i have,

Thank you in advance

Update, I have entered the line and updated to box and started MGCam but got picture
 
Last edited:
The guide is for a combo so one line would be for sat and the other cable

They are just examples
 
Last edited:
You are best looking in the Zgemma section there are guides in there.

Zgemma uses patched Vix images or OpenAtv, so the menus
will look different.

People usually flash a partially set up image from this site then just add a line.

This is for an officially supported box set up from scratch.
 
FTP broke

bees

My Filezilla Client which worked perfectly, now refuses to connect ..... despite using the same settings , as always.

Any ideas why ?
 
You must log in or register to reply here.
Back
Top