do you have a satellite meter or an app on your phone, to get 1w.
OK,
Have you set your dish declination as calculated from the motor manual,?
And the motor angle is correct,?
Fit the dish on the motor arm dead centre, and fit the motor to your pole dead south,
Drive your dish to 1W,
Now little by little move the MOTOR on the pole, you do NOT move the dish.
yes,I watch it on the Tivibu spor 1 website using Turkish VPN. Happy days.
Right back to the motorised. Ive set the motor and dish true south?? Is that right?
Can I use a Zgemma h5.2tc to contol the dish using USAL? and move to 1w?
Cant Get 1w. I have app plus compass and sat meter.
Just can`t get 1w????
Its easy enough just time consuming I posted a set up method in the motorisedI thought it was easy enough when I got mine. Soon realised it's worth paying someone to do it!
Different methods of setting up a motorised.system.First i would check that the pole is exactly vertical Mount.the dishIts easy enough just time consuming I posted a set up method in the motorised
Section
Sent from my SM-A520F using Tapatalk
Different methods of setting up a motorised.system.First i would check that the pole is exactly vertical Mount.the dish
And polar head with the dish forward Set the polar elevation and declination offset according to your site latitiude For example if your latitude is 55° your polar elevation will be 34.4° your. declination of.set would be 7.1° Rotate the dish.and polar head.so.that the dish points true south and
tighten the fixing bolts This can be done by using a satellite meter to find the at 1 west
The next step is to rotate the dish on the polar head to find a reference satellite to the east Astra 28 east this can be.done. by a motor positioner or by unclamping the motor and moving the dish by hand Move the dish from east to west to maximise the signal then slacked the elevation adjustment bolts peak the signal level retighten the bolts Next rotate the dish on its polar head to find a satellite to the west and maximise the signal Then without loosening the elevation.bolts flex the dish up and down to see if the signal can be increased if so the polar head must be adjusted very slightly on the mounting pole
And the whole.procedure repeated until no
Increase in the signal can be found on either east or west Then move the.dish on its polar head to find a satellite as near as
possible to true south check the signal is peaked If not you might have to readjust the declination angle setting on the dish very slightly until the signal level is peaked for all the satellite's
Sent from my SM-A520F using Tapatalk