dangerous
TK Veteran
Var/keys
Usr/keys is the same location
Mikey B OpenAtv 6.1 Support Thread
- Thread starter mikeyb123
- Start date
Usr/keys is the same location
domthedon030
Newbie
You need to download the config file and stick it in with the line under usr/keys. It should be in this thread somewhere. I had the same issue.
Rolandgaros
Member
Does it matter if it’s notepad or word pad?, also do I have to change the file type?
One last thing, do I still need the “keep alive” line as well?
Awesome build. Fixed issues with audio description, missing sound on some channels and Fatal error when scanning with authbouquets.
Just adding some steps in case it helps anyone:
1. Load zip file to usb and flash using the back usb port (flashing took 3 minutes)
2. Swap usb to your external hdd. System/Storage Devices/Initialize
3. InfoPanel/Plugins/Swap Manager (Red to activate, green to start, yellow to autostart)
4. InfoPanel/Softcam Panel/ Cam1/ oscam (Green to start)
5. Visit IP in browser E.g. http://192.168.0.27:83 and add your line
6. Use this guide for applying the oscam.
7. Setup/ServiceSearching/Tuner Configuration/TunerB (Change Network ID)
8. Setup/ServiceSearching/Automatic scan (this takes 10-15 minutes)
9. Setup/ServiceSearching/Autobouquetsmaker/Providers (change network ID)
10. Setup/ServiceSearching/Autobouquetsmaker/Start Scan
11. EPG/MultiEPG Settings/Show bouquets on launch
12. SCP with Filezilla the picons folder to /media/hdd
13. Reboot
14. Grab beer and relax
Just adding some steps in case it helps anyone:
1. Load zip file to usb and flash using the back usb port (flashing took 3 minutes)
2. Swap usb to your external hdd. System/Storage Devices/Initialize
3. InfoPanel/Plugins/Swap Manager (Red to activate, green to start, yellow to autostart)
4. InfoPanel/Softcam Panel/ Cam1/ oscam (Green to start)
5. Visit IP in browser E.g. http://192.168.0.27:83 and add your line
6. Use this guide for applying the oscam.
7. Setup/ServiceSearching/Tuner Configuration/TunerB (Change Network ID)
8. Setup/ServiceSearching/Automatic scan (this takes 10-15 minutes)
9. Setup/ServiceSearching/Autobouquetsmaker/Providers (change network ID)
10. Setup/ServiceSearching/Autobouquetsmaker/Start Scan
11. EPG/MultiEPG Settings/Show bouquets on launch
12. SCP with Filezilla the picons folder to /media/hdd
13. Reboot
14. Grab beer and relax
domthedon030
Newbie
The file itself that you download doesn’t need amending, you just need to FTP it over to the same location as your line. (Usr/keys) Your line should be saved as a .list and under ‘All files’ type.
Once the config file and your line are in their you just need to start the cam. (Press blue, softcams manager, Cam 1, change to mgcamd, start)
I’ve got mine working perfectly now, I used Mikeys latest build from 3/12/17 and all previous issues with loading circle etc are now gone. It’s by far the best image I’ve used. Excellent build, many thanks to Mikeyb!
sofia777
Newbie
Hi Mikey,
First off loving the build. You have pretty much done everything for us. I am obviously doing something wrong because i have followed your instructions word for word and am only getting FTA channels after adding my N line into the newcamD folder in usr/keys via FTP.(only using tuner B) Pulling my hair out o_O
First off loving the build. You have pretty much done everything for us. I am obviously doing something wrong because i have followed your instructions word for word and am only getting FTA channels after adding my N line into the newcamD folder in usr/keys via FTP.(only using tuner B) Pulling my hair out o_O
domthedon030
Newbie
You need to download the config file, there’s a link somewhere in this thread.
Just download it and FTP it over to the usr/keys folder with your line.
domthedon030
Newbie
Here’s the link..
http://www24.zippyshare.com/v/gkSrlotO/file.html
Just FTP this over to same location as your newcamd.list (usr/keys).
http://www24.zippyshare.com/v/gkSrlotO/file.html
Just FTP this over to same location as your newcamd.list (usr/keys).
sofia777
Newbie
Yeah i done that last night. Slowly losing the will to live and sick of the husband asking if the sports channels are back on yet lol thanks anyway.
domthedon030
Newbie
Did you press blue, softcam manager, Cam 1, change to mgcamd, press start?
sofia777
Newbie
yep done that. Just asked for a test line to make sure my lines no off.
domthedon030
Newbie
You may need to low level format the usb stick before putting the files on it and flashing. Also, these boxes can be finicky with which brand of usb stick you’re using. San Disk Cruzer’s are known to work well.
Do a search for steps to flashing zgemma H1 and you’ll find everything you need.
Rolandgaros
Member
Are you pressing power button on front when displaying usb, press, hold a few secs,release
it doesn't even come up usb just goes straight to boot
dangerous
TK Veteran
Check you have the right image.
Try a new usb stick, if you bought if from fleabay that's why it won't work - it's fake
Ive used the same stick I always use and flash other boxes so I no the stick is good. I got the image from here
dangerous
TK Veteran
Is the image for the LC ?
Yes correct image for lc box
dangerous
TK Veteran
Just the zgemma folder (unzipped) should be on the usb stick.
No other usb or HDD should be plugged in when flashing.
If the correct image is on the usb the receiver should read it and the display change to USB update, then you press the standby button to flash.
Similar threads
- Sticky
- Featured
Read First Post
Request a IPTV Server - April/May/June.
- Locked
