Multifeed lnb

[linesman66]

Just bought this premium x quad l.n.b
With my multi sat installation Will remove the inverto octo l.n.b on.28 East Use this l.n.b for 23.5 and quad red rocket l.n. b.for 28east hope to recieve
Good s.n.r on 23.5
Has anyone used this type off l.n.b
Before ?

 

[linesman66]

Just added another diseqc switch 4x1
To my multisat system
One cable feed tunner A internal(DVB)-2S
DiSEqCA/B/C/D not connected 13.0E Hotbird
13B/13C/13E 19.2EKu-bandAstra 1KR/1L/1M
/1N 28.2East Astra 2E/2F/2G
TunerB AVL6211(DVB-S2
Not configured

AUTOMATIC SCAN 45OO CHANNELS

 

[cactikid]

Ahh so thats what you have and a nice thick bracket for mounting on.

 

[linesman66]

yes mate this lock down is sending me satellite mad

 

[gilvey]

what size dish are you using

 

[linesman66]

80cm satellite dish
With 6 satellite cable feeds
3 × 4×1 disqec switches
Single cable feed for 28.2E/F/G reciever h9s
Twin cable feed for h9twin tunner b Configured for 28.2 E/F/G
Tunner A mode DISEQC A/B port A 13.0E Hotbird 13B/13/C/13E 19.2 Ku band Astra
1KR/1L/1M/1N
Same for the formuler f1 reciever
H2.s single cable feed tunner B not configured
Tunner A mode DISEQC port A /B/C
13.0E Hotbird 13B/13/C/13E 19.2 Ku band Astra 1KR/1L/1M/1N 28.2 E/F/G port d not
Connected

 

[gilvey]

I'm thinking of getting an 80cm to accompany my motorised dish. I have 19 and 28.2 on a sky mini dish but an 80cm would give me more options via disecq

 

[linesman66]

With my installation getting good s.n.r
On 13 19 28
I use this bracket the arm is longer

4 LNB Multiblock Holder For Triax, SAB, Technomate, Inverto Multi Feed Dish

 

[cactikid]

Dont see too many invisible brackets in use.

 

[linesman66]

Genuine Gibertini Robust Multi 2 Way LNB HOLDER MF-2120 fits other dishes too

Just fitted the above to zone2 satellite dish
Just remove the original adapter clip and the
Bracket bolts to the arm Most off the bolts
Are 7mm can be difficult to tighten
Used the original sky l.n.b for the reference
Satellite 19.2 multifeed l.n.b for 28.2
Downfall there is no +or _ till .with the main arm to maximise the Signal
S.n.r on 19 .2 was 85 on v and h side off the transponder s.n.r on 28 was similar

 

[linesman66]

Install

 

[linesman66]

Just added another diseqc switch 4x1
To my multisat system
One cable feed tunner A internal(DVB)-2S
DiSEqCA/B/C/D not connected 13.0E Hotbird
13B/13C/13E 19.2EKu-bandAstra 1KR/1L/1M
/1N 28.2East Astra 2E/2F/2G
TunerB AVL6211(DVB-S2
Not configured

AUTOMATIC SCAN 45OO CHANNELS

 

[cactikid]

Wow sat over load and asking if any strong wind gives movement of arm or lnb.

 

[linesman66]

Never had any problems Good installer
Installed myself

 

[gilvey]

I've just set this up for a friend.
4 lnbs 13,19.2,23.5,28.2

 

[Accelerated_Dragon]

I've just set this up for a friend.
4 lnbs 13,19.2,23.5,28.2View attachment 77597View attachment 77598View attachment 77599View attachment 77600View attachment 77601

Nice setup mate. Where are you based ? Not coming to Manchester side ? My setup is missing two more sats......

 

[pieeater2015]

Nice setup mate. Where are you based ? Not coming to Manchester side ? My setup is missing two more sats......

Motorise your dish, especially if your setting up at ground level.

 

[gilvey]

it was set up on a tripod. it was then fitted onto a bracket on the house after. easier to work at ground level than from a ladder. just attached to the house after then lined it up

ive already got a motorised setup.

this was set up as an easy to use option with the option to record simultaneously off different birds which motorised cannot do

 

[gilvey]

Nice setup mate. Where are you based ? Not coming to Manchester side ? My setup is missing two more sats......

im in staffs mate

 

[linesman66]

Good set up If you like you can protect your F connectors with insulated boots

https://www.amazon.co.uk/gp/slredir...26699633170852&widgetName=sp_phone_search_mtf