What's new
By:
Filters

Need help with splitter

s-l1600.jpg

This is the splitter that i have ordered is this fitted with isolation built in

Technetix ESI-02N Double Sided 2 Way Splitter

Overview

Products within the Ecoline range excel both in electrical
and mechanical performance.

Though designed for use
within indoor environments, they are also specified for use
within street-side plant.

The products are easy to install
with a compact housing and some models are stackable.

All F-connector contacts meet the SCTE standards (ANSI
SCTE 02 2006).

The material of the inner spring has been
designed for connecting coax cables with an inner core
of 0.56 to 1.30 mm.

It retains this elasticity and provides
effective clamping force even when varying thicknesses of
inner conductor are connected in succession.

The intermodulation performance, which is an important
factor in high level return path signals, has been greatly
improved through a newly developed ferrite and specially
designed circuits.

The high frequency shielding exceeds
Class A requirements (EN-50083-2:2006) over the whole
frequency range from 5 MHz to 1000 MHz.

Ingress Safe

Our patented Ingress Safe technology uses a phase
cancellation technique to considerably reduce ingress
created within the home.

It has no adverse effect on the
CATV spectrum and is transparent to the forward and
reverse path signals.

• Significantly reduces noise on CATV networks,
improving network performance

• Field tests show Ingress Safe units in the distribution
network can deliver improvement in the carrier to noise
ratio that averages from between 3 dB and 12 dB,
depending on the network topology

• Prevents or delays the need to deploy technicians to
rectify faults caused by the cumulative effects of ingress
on network performance and customer service

• High quality 2-way balanced and unbalanced
installation splitters

• Modem Safe™ surge protection and
intermodulation reduction solution

• IngressSafe™ - unique passive ingress reduction
technology

• High return loss

• CPD Safe™ - NiSn plated housing

• Easy to install - compact and stackable in-line
model

• 7 mm stand-off space to fit cable underneath

• Exceeds EN Class A screening requirements

Modem Safe
Modem Safe is a highly effective surge protection solution
for sensitive network and in-home CPE. Based on passive
circuits, the technology does not rely on discharge tubes,
extending the lifespan of the solution.

• Blocks high and low voltage pulses and unwanted DC
voltages

• Prevents internal ferrites within the product from
becoming magnetised (avoiding deterioration in the
performance of CPE)

• Drives fewer reported faults

• Improves customer service

• Reduces truck rolls

CPD Safe
CPD (Common Path Distortion) is well known for producing
signal interference on networks. It is caused by electrolytic
corrosion or the oxidisation of dissimilar metals when in
close contact. CPD Safe technology protects against
CPD.

• Removes a primary cause of CPD

• Reduces signal interference on the network

• Drives fewer reported faults

• Reduces truck rolls
 
Dont get confussed, the isolator stays in the white box, you then cable to the IN of the splitter, then cable to your equipment.
 
southsimon said:
Dont get confussed, the isolator stays in the white box, you then cable to the IN of the splitter, then cable to your equipment.
Click to expand...

Thanks I was just concerned that having the isolator fitted and the splitter fitted that it would reduce the strength of the single
 
as mentioned above all the isolator does is to protect your equipment against power surge, like electrical storms etc. having a strong or weak cable signal is a different ball game.
 
If you're using that 2 way splitter, it has surge protection built into it so if you wish, you could do away with the single 1 but not really necessary.
 
Cables and splitter arrived this morning connected them up the picture as improved but still getting slight picture freeze would a HDU unit help? If so which one do i need i only conect router an cable box
 
Kevin Bailey said:
Cables and splitter arrived this morning connected them up the picture as improved but still getting slight picture freeze would a HDU unit help? If so which one do i need i only conect router an cable box
Click to expand...

what signal rate do you have showing for sky sports 1 hd?
 
Kevin Bailey said:
Cables and splitter arrived this morning connected them up the picture as improved but still getting slight picture freeze would a HDU unit help? If so which one do i need i only conect router an cable box
Click to expand...

Freeze or pixellation?
 
Directly outside where the wire comes through the wall to go into the white box, there's usually a brown box unless it's not the main access point ... do you have any other of these in the house? there must be a box on your wall outside somewhere.
 
ste said:
Directly outside where the wire comes through the wall to go into the white box, there's usually a brown box unless it's not the main access point ... do you have any other of these in the house? there must be a box on your wall outside somewhere.
Click to expand...
There in no other box outside the house the cable comes up from the ground up the wall and in to the house to the white box
 
Never seen it set up like this before ...

can you check the power levels on your router

are you 100% sure you have the correct net id
 
You must log in or register to reply here.
Back
Top