Pixelating HD channels zgemma H7c

Warhammer14

Registered
Hi I’m getting more pixelating HD channels now on the zgemma h7c . Any ideas as I’ve again tried my h2h box and no problems at all . I have tried the HDU on my cable feed in but it makes no difference. Is it that the Arm boxes struggle with HD or anyone know how to possibly rectify it .

Cheers
 
Sponsored Links

rs500nutter

TK Veteran
Forum Supporter
When you say original cables approximatly how old are they ? What cabling are you using from the splitter to the box ?
Some box tuners are more sensitive than others .
 

pabloescaban

TK Veteran
Forum Supporter
I am using the original Vm cables which are in good condition and I’m now using a hdu splitter . I’ll post my levels now View attachment 39084 It works fine on my zgemma h2h
That picture is useless, can't see anything as it's just a mass of lines and squiggles but it looks like they're miles out, you must be ale to get a better image than that?
use 'print screen' and edit the picture, or better still, when you open the router/modem and have the details in front of you just click select all>copy
then come here and click paste
 

Warhammer14

Registered
That picture is useless, can't see anything as it's just a mass of lines and squiggles but it looks like they're miles out, you must be ale to get a better image than that?
use 'print screen' and edit the picture, or better still, when you open the router/modem and have the details in front of you just click select all>copy
then come here and click paste
Sorry pablo I attached wrong image , here is what I have 32A1D17A-715F-4018-A74F-3CA27BA43F37.jpeg
 

Warhammer14

Registered
When you say original cables approximatly how old are they ? What cabling are you using from the splitter to the box ?
Some box tuners are more sensitive than others .
. They are less than 2 years old , and not sure what cabling is called. Was the stuff vm put in. Single feed into the house that splits into 2 , 20 cm from the box on wall . The splitter is a VM HDU
 
Last edited:

biff2005

TK Veteran
with HDU fitted

ChannelFrequency (Hz)Power (dBmV)SNR (dB)ModulationChannel ID
12990000002.940256 qam21


without HDU

ChannelFrequency (Hz)Power (dBmV)SNR (dB)ModulationChannel ID
1299000000-1.540256 qam21

not much difference for me

try your box without the HDU fitted
 

rs500nutter

TK Veteran
Forum Supporter
. They are less than 2 years old , and not sure what cabling is called. Was the stuff vm put in. Single feed into the house that splits into 2 , 20 cm from the box on wall . The splitter is a VM HDU
Are you running oscam line on the box because i know some people have been struggling with it with picture break up etc.
The modem levels are within tolerance etc.
 

pabloescaban

TK Veteran
Forum Supporter
I think you're going all around the houses here.
The line works fine in H2h but not in 4k ARM box, ergo it's not power levels or the line/server as it would be same on both
Also same cables and splitter are in use for both boxes so it's not these
This points towards either the Tuner in the 4K box or the softcam/software used
AS an aside, you haven't posted pictures of the cables/connetions, - if they're the white push-fit ones VM supply with Tivo, they are no good, throw them away and get proper screw ended ones
 

Warhammer14

Registered
I think you're going all around the houses here.
The line works fine in H2h but not in 4k ARM box, ergo it's not power levels or the line/server as it would be same on both
Also same cables and splitter are in use for both boxes so it's not these
This points towards either the Tuner in the 4K box or the softcam/software used
AS an aside, you haven't posted pictures of the cables/connetions, - if they're the white push-fit ones VM supply with Tivo, they are no good, throw them away and get proper screw ended ones
Sorry pablo they are all screw ones I meant to say . Yes I know I am going round the houses but I’ve tried most the options and trying to narrow down the problem. I am thinking it’s the tuners in the arm box but I was under the impression only Oscam works on these boxes
 

pabloescaban

TK Veteran
Forum Supporter
Sorry pablo they are all screw ones I meant to say . Yes I know I am going round the houses but I’ve tried most the options and trying to narrow down the problem. I am thinking it’s the tuners in the arm box but I was under the impression only Oscam works on these boxes
nope.
if using openatv or openvix you can use oscam or CCcam2.3.2
if using other builds like Blackhole or PurE2 you can use mgcamd

There's been new oscam files released a week or two ago, you want to try these first
! Oscam !.zip
 
Top