Questions and input regarding motorised set up on VIARK and ENIMGA 2

Status
Not open for further replies.
OK so I changed the viark from motor to fixed sky dish which holds a gigablue unicable but using legacy port.
This dish has always been fixed to 28.2 Astra and has never been touched in a while tnt sports is perfect at 63 percent.
So it's more or less the same.

BBC 1 HD is at 73 again with perfect picture.

Anyways I'll put the cable back onto my motor dish and feedback
Maybe my particular area isn't that great and picking signal. He said I have one of those community fibre poles outside my house which could obscure the signal but he said it's unlikely to cause problems.
Could be that
 
I couldn't see anything wrong with the lnb holder. It's locked in exactly at the place where the plastic parts clip in.

I'll have a closer look when I get a chance.
I wanted to ask that for example if I switch to 0.8w thor frequency.
Is it possible that I get signal on some channels within that frequency and other channels nothing?

For example I get perfect signal on nova sport 1 HD on thor but then on prima sport 1/2 I get nothing

I haven't really explored that satellite frequency properly but was just browsing in it.
On nova sport 1 hd and Prima sport 1 on my gigbablue quad 4k pro i'm getting 67% this receiver reads about 10% lower than other channels so i guess the signal really is around 74-74%. I'm way further north that you too.
 
I'm getting 70 on prima sport 1
Has nothing to do with your situation.

A zone 1 dish is beating your 1 meter dish, ive advised you to get the installer back, members have also given you advice and you skate around it and a day or so later we are discussing the same thing again.

This is not your problem, give your installer and ring and get him to sort out his mess.

Threads closed.
 
Status
Not open for further replies.
Back
Top