Hi All,
Ok so im a bit of a noob when it comes to the f5s however I am a bit techy so know my way around stuff. This one has me baffled though.
1, Take a feed from my sky+ hd and feed it into f5s = no Boomerang or boomerang +1
2, Remove the other feed from my Sky+ hd and i get the channels. But the second I connect 1 cable back to the sky+hd box i loose it again.
3, Run a loop cable from the F5s into the Sky+ hd and channels stay and I get a signal on sky. BUT!! the minute I connect the 2nd cable back into sky I loose boomerang again.
any ideas?
Cheers
MRJ
---------- Post Merged at 12:30 PM ----------
Spotted LNB power in the menu. Reminded me of something that used to happen on Humax pvrs, Turned off LNB power and hey presto. all working.
Ok so im a bit of a noob when it comes to the f5s however I am a bit techy so know my way around stuff. This one has me baffled though.
1, Take a feed from my sky+ hd and feed it into f5s = no Boomerang or boomerang +1
2, Remove the other feed from my Sky+ hd and i get the channels. But the second I connect 1 cable back to the sky+hd box i loose it again.
3, Run a loop cable from the F5s into the Sky+ hd and channels stay and I get a signal on sky. BUT!! the minute I connect the 2nd cable back into sky I loose boomerang again.
any ideas?
Cheers
MRJ
---------- Post Merged at 12:30 PM ----------
Spotted LNB power in the menu. Reminded me of something that used to happen on Humax pvrs, Turned off LNB power and hey presto. all working.