Matt Gooding
Newbie
Hi all and TIA for any advice given. Even if its don't waste your time and chuck it in the bin.
Ok so the story goes after 4 years of getting euro iptv for her indoors and it sometimes being a bit erratic i decided to go down the route of the old fashioned sat way.
Bought a new 80cm dish and got a new TNTSAT card via my uncle who lives in France and plugged it into my 5 year old strong tnt sat box.
All is good. Brilliant signal and cracking picture but......
Two things, one I cant get two LNB's to work on one dish. I have been trying for most of yesterday to get it aligned using a LNB holder but no joy.
Its either good strong Astra 19.2 and no 28.2 or the other way around. Based just below Derby by the way. I didnt want two dishes mounting on the side of the house thats all.
Number 2, I decided to leave that and try to setup H2S with the uni lnb pointing to astra 19.2 and my original and still in place sat dish pointing at 28.2.
Got good signal strength so i used Echanneliser to create bouqets and uploaded to the box and slotted my TNT smart card in.
Nothing!!
EPG populated ok but i cant get the picture at all. Now i have played about with it that much everytime i go to setting and look at the signal strength it crashed and reboots!!!
I was going to set it up so it was one dish, two lnb, 2 diseqc switches and 2 Zgemma h2s boxes so she could watch it in either room and stream to her phone or tablet or pc if she wanted as we do that with english sat channels already.
So the big question ....
Has anyone ever done this at all with an H2S and if so have you got an idiots guide for a complete idiot.
Cheers
Matt
Ok so the story goes after 4 years of getting euro iptv for her indoors and it sometimes being a bit erratic i decided to go down the route of the old fashioned sat way.
Bought a new 80cm dish and got a new TNTSAT card via my uncle who lives in France and plugged it into my 5 year old strong tnt sat box.
All is good. Brilliant signal and cracking picture but......
Two things, one I cant get two LNB's to work on one dish. I have been trying for most of yesterday to get it aligned using a LNB holder but no joy.
Its either good strong Astra 19.2 and no 28.2 or the other way around. Based just below Derby by the way. I didnt want two dishes mounting on the side of the house thats all.
Number 2, I decided to leave that and try to setup H2S with the uni lnb pointing to astra 19.2 and my original and still in place sat dish pointing at 28.2.
Got good signal strength so i used Echanneliser to create bouqets and uploaded to the box and slotted my TNT smart card in.
Nothing!!
EPG populated ok but i cant get the picture at all. Now i have played about with it that much everytime i go to setting and look at the signal strength it crashed and reboots!!!
I was going to set it up so it was one dish, two lnb, 2 diseqc switches and 2 Zgemma h2s boxes so she could watch it in either room and stream to her phone or tablet or pc if she wanted as we do that with english sat channels already.
So the big question ....
Has anyone ever done this at all with an H2S and if so have you got an idiots guide for a complete idiot.
Cheers
Matt