thomas88
Member
Vix 3.2.007 - Fast N' Loud - VERY FAST Backup build
View attachment 14080
Build info:
VERY VERY FAST BUILD
This is just a build for watching and recording tv no thrills or spills.
No skyblue skin as it slows down the builds.
A/V setting mode 720p
Vix spinner removed and Homer spinner installed
add what plugins or skins you like....... #80)
INSTALLED ON THIS BUILD
Softcams:
MGcamd 1.38
View attachment 14081
Plugins:
Cacheflush
CrossEPG Downloader
OpenWebif
Permanent VFD Clock
View attachment 14082
Bootlogo:
Fast N' Loud
View attachment 14080
skin:
Default - Vix Night-HD
View attachment 14083
SPINNER
Homer
View attachment 14098
ZGEMMA DISHCABLE'S SETTUP
View attachment 14093
plug one dish cable into tuner A. and the second cable into B.
or
plug single cable in to A. turn B off.
setup,service searching,Tuner configuration,
set Tuner B: not configued.
FLASHING THE ZGEMMA
1,Download Fast n Loud build software from the link.
2, Unzip it and copy the Zgemma folder to a fat32 formatted USB Drive.
3, Plug the USB to the back panel USB port.
4, Power on,
5, Then the display shows View attachment 14084
6, power off, reboot.
ZGEMMA S2 SETTUP
ADDING A BIGGER USB DRIVE TO THE BOX FOR RECORDING
initialise your drive or AFTER FLASH (make sure zgemma folder is not on usb)
Insert usb in back
Turn on
Menu
Setup
System
Storage devices
Initialisation (select ur usb/hdd)
Initialise with red button.
View attachment 14085
Now Check
Menu
Setup
Vix
Mount manager (make sure mount is to hdd and format ext4)
View attachment 14092
SWAPFILE SETUP
Menu
Setup
Vix
Swap manager
Make sure its created, enable at startup and active- or see setup thread.
everything else should be set to correct paths after reboot.
View attachment 14086
SCANNING CHANNELS
Menu
setup
service searching
autobouquets maker
providers. Change skyuk;area to your area.
save
delete bouquets
start scan
reboot
View attachment 14087
FXP N-LINE
flashfxp setup on your pc
zgemma connected to router
we are using MGcamd 1.38, you will need to add your new N.line in the newcamd.list
ok lets get the box ip, menu,setup,system,network,FTPsetup(running)good.. now device setup, adapter settings.
here you can see the ip address. (my one is 192.168.1.93)and user interface is yes and use DHCP yes. network test all good.
so run fxp client connect, add ip, user:root password,root port,21
EDIT AND SAVE FILE
go to /usr/keys/
right click on the newcamd.list and edit.
so it looks like this.
CWS = servicesat.syt.net 14030 gam0007 SatTO 01 02 03 04 05 06 07 08 09 10 11 12 13 14
save logout.
View attachment 14088
START SOFTCAM
View attachment 14081
menu
setup
softcam /CI
softcam manager
start/restart
exit
PICONS
View attachment 14099
add the picon folder to your HDD
SCREENS
View attachment 14089
View attachment 14090
View attachment 14091
DOWNLOADS
Link: http://www.megafileupload.com/qdrR/Vix_3.2.007_-_Fast_N__Loud_-_build.rar
RAR Password:qwerty
build by Thomas88
if you test this build plz's give feedback on build performance.
View attachment 14080
Build info:
VERY VERY FAST BUILD
This is just a build for watching and recording tv no thrills or spills.
No skyblue skin as it slows down the builds.
A/V setting mode 720p
Vix spinner removed and Homer spinner installed
add what plugins or skins you like....... #80)
INSTALLED ON THIS BUILD
Softcams:
MGcamd 1.38
View attachment 14081
Plugins:
Cacheflush
CrossEPG Downloader
OpenWebif
Permanent VFD Clock
View attachment 14082
Bootlogo:
Fast N' Loud
View attachment 14080
skin:
Default - Vix Night-HD
View attachment 14083
SPINNER
Homer
View attachment 14098
ZGEMMA DISHCABLE'S SETTUP
View attachment 14093
plug one dish cable into tuner A. and the second cable into B.
or
plug single cable in to A. turn B off.
setup,service searching,Tuner configuration,
set Tuner B: not configued.
FLASHING THE ZGEMMA
1,Download Fast n Loud build software from the link.
2, Unzip it and copy the Zgemma folder to a fat32 formatted USB Drive.
3, Plug the USB to the back panel USB port.
4, Power on,
5, Then the display shows View attachment 14084
6, power off, reboot.
ZGEMMA S2 SETTUP
ADDING A BIGGER USB DRIVE TO THE BOX FOR RECORDING
initialise your drive or AFTER FLASH (make sure zgemma folder is not on usb)
Insert usb in back
Turn on
Menu
Setup
System
Storage devices
Initialisation (select ur usb/hdd)
Initialise with red button.
View attachment 14085
Now Check
Menu
Setup
Vix
Mount manager (make sure mount is to hdd and format ext4)
View attachment 14092
SWAPFILE SETUP
Menu
Setup
Vix
Swap manager
Make sure its created, enable at startup and active- or see setup thread.
everything else should be set to correct paths after reboot.
View attachment 14086
SCANNING CHANNELS
Menu
setup
service searching
autobouquets maker
providers. Change skyuk;area to your area.
save
delete bouquets
start scan
reboot
View attachment 14087
FXP N-LINE
flashfxp setup on your pc
zgemma connected to router
we are using MGcamd 1.38, you will need to add your new N.line in the newcamd.list
ok lets get the box ip, menu,setup,system,network,FTPsetup(running)good.. now device setup, adapter settings.
here you can see the ip address. (my one is 192.168.1.93)and user interface is yes and use DHCP yes. network test all good.
so run fxp client connect, add ip, user:root password,root port,21
EDIT AND SAVE FILE
go to /usr/keys/
right click on the newcamd.list and edit.
so it looks like this.
CWS = servicesat.syt.net 14030 gam0007 SatTO 01 02 03 04 05 06 07 08 09 10 11 12 13 14
save logout.
View attachment 14088
START SOFTCAM
View attachment 14081
menu
setup
softcam /CI
softcam manager
start/restart
exit
PICONS
View attachment 14099
add the picon folder to your HDD
SCREENS
View attachment 14089
View attachment 14090
View attachment 14091
DOWNLOADS
Link: http://www.megafileupload.com/qdrR/Vix_3.2.007_-_Fast_N__Loud_-_build.rar
RAR Password:qwerty
build by Thomas88
if you test this build plz's give feedback on build performance.
Last edited: