HiI had to save the image and zoom in!
View attachment 19912
I could be wrong but has the bootlogoswapper been deleted and the system is looking for it?
I found this forum, so i thought i'd take a chance. Well, I think it was "mutant 1200" but the image was openvix 5.4?? (one from 2019). It was working ok with my channels via "echannelizer" so tried to add Jedi etc but it told me no plugin were available and to update to a later image, it wouldn't update by internet so i tried to flash it to Openatv 6.3, and 6.4 but even then it wouldn't flash, it said "boot" (not usb) then counted up, and picture and channels would appear OK (I should have stopped there) so i thought i'd save the image but then it started to go to "49" then "software error" shuts down restarts (it's like groundhog day). I've left it unplugged hoping it cools down and starts again?This thread is 4 years old.You have bricked your box but the looks of it so what firmware was on it before you started playing and adding stuff.
If it said Mutant in the 'about' screen it is an old patched version of ViX.
Try formatting your USB with this http://www.willobuild.xyz/files/Utilities/Preparing Flash Drives.zip
You should be able to flash by usb then.
If you want to try my build http://www.willobuild.xyz/files/Images/couchflash/willobuild-openvix-5.4.series-zgemma-h3.zip
Just power the box off and extract the zip to USB.
When complete power off and insert storage drive and then power on.
Yes, "force" is in file, plus imageversion, kernel.bin, rootfs.binNo FLSH on screen? Check the usb has a 'force' file in the h3 sub folder.
no luck, just to confirm i send to usb folder "h3" with the four files inside the folder "h3"Try another usb then, although I've never had bootice fail to correctly repartition and format before.
i didn't see your reply , i'll change to another PSU . PLus i've formatted another usbUse a different PSU.
The old one may not be putting enough power out to fire it up now