nufc4life82
Newbie
Do we have a change log of what is new in the slky skin 4.0?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
WooshBuild v4.00 ALPHA Release - OpenATV 5.3
- Thread starter benijofar
- Start date
- Status
wooshman
VIP Member
That was the nicest one of many. I had a few drafts on the go and decided it was the nicest one to get my point across.
I am still in Nice Mode and we all miss the odd instruction from time to time so it is no big deal.
---------- Post Merged at 08:04 PM ----------
Not in this thread you wont as it is for WooshBuild v4 Alpha. You will however find the info you are looking for in Kiddac's Slyk skin thread in the 2S section of the forum once he has released it.
wooshman
VIP Member
Have a play in the AB E2 settings Bizz and see what you can find by reading the descriptions. I thought I had Create All Main bouquets set to no which says about set to no if you move or delete.
Bizz
Newbie
Yeah that's the one I usually set to no but it doesn't seem to do it, I'll see what happens tonight after this update.
Sent from my iPhone using Tapatalk
LloydyLUFC
Newbie
Hi Wooshman. Thanks for the update! When I click flash online I can only see 3.03 on your build and 5.1 on the nightly?!? Any ideas what I may be missing?
wooshman
VIP Member
Yes, I think you are using a Zgemma 2S box which means you are missing the Zgemma H2S :-)
Sorry
splitroaster
Member
Mines would not update settings either was on 4.00 upgraded to 4.03 but think I had not ticked things to backup. Noticed it after I had did the upgrade
Sent from my SM-G925F using Tapatalk
Sent from my SM-G925F using Tapatalk
LloydyLUFC
Newbie
Haha what a nob head!
School reports always said "can't be arsed reading"
Sent from my iPhone using Tapatalk
wooshman
VIP Member
The latest and final release of WooshBuild v4 Alpha has been uploaded for the Zgemma H2S
The version is v4.004 and is available from the Flash online feature as before.
It includes the full release of Kiddac's Slyk HD v4 and is the only change in this release, no elements of WooshBuild have changed except for the skin.
More importantly, I have only given it a version increase to p*ss Benijofar off because I am good like that and I know just how much he liked version 1,2 and 3!
There you go Beni, you can now flash v4.004 at your leisure :whistling:
------------------------------------------------------------------------------------------------------------------
OK so now I have been called a few names by Beni over Skype it must be time for some screen shots.
WooshBuild AutoBouquet Country / Region Setup
This is remove the problem of needing to edit files when channels move. When BBC1 and BBC2 moved it caused a headache, when BT Sport HD went it caused a slight headache. This plugin, when run, gets the most recent channel swaps and free to air HD list and puts them on your box. By selecting your country at the start, your EPG is setup accordingly.
USB Cam Importer
Unique to WooshBuild the cam importer does exactly that, imports your cccam.cfg or newcamd.list file from a usb stick, copies it to the right place and starts up your cam depending on the file found.
IPTV Player Icon List & Updater
What was the brain child of Beijofar actually turned out rather well. It was the hardest plugin I programmed but was well worth it.
IPTV Player as standard comes with 103 "hosts" different sources for streaming or downloading. Now 70 of those are either rubbish, don't work correctly, foreign or other various reasons. Beni spent a long long time going through and testing each and every one for quality, content and more getting the final good or OK list down to 30 - 36. This plugin shows you what is remaing, what it streams, shows, quality etc ad in the past, if you wanted this set of hosts you had to edit the settings yourself turning off all the ones which were no good.
This plugin not only keeps you up to date of the best hosts but also sets your IPTV Player to those hosts Beni has tested. This is not a one off as he continues to monitor new hosts, adding and removing as needed. This plugin, when run, will keep you up to date too.
Online Flashing
Of course the ability to flash online when a new release is still here as all you Alpha testers know. A couple of remote prods and the latest image is flashed to your box. No USB required.
BaseBuild v4 Easy Setup
Not wanting to be left out, BaseBuild now comes with two simple plugins guiding your through the initial flashing steps. This is aimed at new users of WooshBuild who do not already have WooshBuild installed. This will improve over time.
Screen shots...... sod off I have been flashing my box all day long, you will have to wait for some of that :-p
The version is v4.004 and is available from the Flash online feature as before.
It includes the full release of Kiddac's Slyk HD v4 and is the only change in this release, no elements of WooshBuild have changed except for the skin.
More importantly, I have only given it a version increase to p*ss Benijofar off because I am good like that and I know just how much he liked version 1,2 and 3!
There you go Beni, you can now flash v4.004 at your leisure :whistling:
------------------------------------------------------------------------------------------------------------------
OK so now I have been called a few names by Beni over Skype it must be time for some screen shots.
WooshBuild AutoBouquet Country / Region Setup
This is remove the problem of needing to edit files when channels move. When BBC1 and BBC2 moved it caused a headache, when BT Sport HD went it caused a slight headache. This plugin, when run, gets the most recent channel swaps and free to air HD list and puts them on your box. By selecting your country at the start, your EPG is setup accordingly.
USB Cam Importer
Unique to WooshBuild the cam importer does exactly that, imports your cccam.cfg or newcamd.list file from a usb stick, copies it to the right place and starts up your cam depending on the file found.
IPTV Player Icon List & Updater
What was the brain child of Beijofar actually turned out rather well. It was the hardest plugin I programmed but was well worth it.
IPTV Player as standard comes with 103 "hosts" different sources for streaming or downloading. Now 70 of those are either rubbish, don't work correctly, foreign or other various reasons. Beni spent a long long time going through and testing each and every one for quality, content and more getting the final good or OK list down to 30 - 36. This plugin shows you what is remaing, what it streams, shows, quality etc ad in the past, if you wanted this set of hosts you had to edit the settings yourself turning off all the ones which were no good.
This plugin not only keeps you up to date of the best hosts but also sets your IPTV Player to those hosts Beni has tested. This is not a one off as he continues to monitor new hosts, adding and removing as needed. This plugin, when run, will keep you up to date too.
Online Flashing
Of course the ability to flash online when a new release is still here as all you Alpha testers know. A couple of remote prods and the latest image is flashed to your box. No USB required.
BaseBuild v4 Easy Setup
Not wanting to be left out, BaseBuild now comes with two simple plugins guiding your through the initial flashing steps. This is aimed at new users of WooshBuild who do not already have WooshBuild installed. This will improve over time.
Screen shots...... sod off I have been flashing my box all day long, you will have to wait for some of that :-p
Last edited:
contracts34
TK Veteran
I can't wait to be brave enough to try it :p
It seems as though you have corruption somewhere.
I suggest you follow the links and install the V4 Basebuild and then flash the latest v4.004 version for a clean install.
Probably a good idea to redo the USB hdd as well as the problem could be retained if you try to restore or use existing USB sticks.
Make sure you keep a copy of your line available.
Bizz
Newbie
Cheers for the info, I just backed up my settings and flashed the latest release and guess what.... It let me restore my settings. Very strange but hey ho.
Sent from my iPhone using Tapatalk
- Status