GrogBuild ZGemma H2h Bricked?

[Cairnsy99]

Hi,
I've had issues recently regards memory with this box which I thought were sorted.
This morning, the box is now stuck in boot (not even getting to 49 like it was last time)
I can't connect via openwebif, putty, FileZilla or via webpage.

Is it knackered?

 

[Graham19811981]

Not be knackered! I would try different power lead then put a build on it I’d recommend grogg freerange build

 

[Cairnsy99]

Not be knackered! I would try different power lead then put a build on it I’d recommend grogg freerange build

I had grogbuild on it already.
I can’t connect to the box in any way and it won’t recognise my usb stick.

I think it has gone to dodgy box heaven so looks like I’ll be needing a replacement

 

[Graham19811981]

So it actually boots up or stuck on a number on the front display screen?

 

[Cairnsy99]

So it actually boots up or stuck on a number on the front display screen?

Stuck on boot. Doesn’t even get to one per cent

 

[bazcfc1]

Just try reflashing with plain open atv 6.2 then put infinity on dsayers2014 image

 

[Cairnsy99]

Just try reflashing with plain open atv 6.2 then put infinity on dsayers2014 image

I’ll try with another usb stick but it wouldn’t recognise the first one I tried.

 

[grog68]

I've only ever had one box that was stuck on boot and couldn't be sorted, most are fixable.

Try different powersuply
try booting up without a usb plugged in
format your usb stick with hdguru and then try putting atv image on there and see if it will flash.

 

[wullboy]

I’ll try with another usb stick but it wouldn’t recognise the first one I tried.

Do a deep format on the usb stick first m8, [ keep it under 16gb ] then put an image on it and try again

 

[Cairnsy99]

I've just tried with another USB and it recognises this.
It sys USB then updt then USB then updt and then goes back to boot and stays there

 

[grog68]

turn the box off at power, then turn back on but this time press the power button on the front of the box for a few secodns and it should change to flsh

 

[Cairnsy99]

turn the box off at power, then turn back on but this time press the power button on the front of the box for a few secodns and it should change to flsh

Great stuff.
It looks like it's flashing your build now.

Thanks to yourself and everyone else for taking the time to help.

I may be back shortly for help setting up my IPTV :)