makido
VIP Member
Yes either of them will open webif
Wooshbuild Support Thread
- Thread starter benijofar
- Start date
Thanks I will reflash it before wooshbuild
Hi
Having trouble fashing there doesn't seem to be any buttons up/down tried pulling plug but just goes to boot!! Help
pabloescaban
VIP Member
Format the USB with FAT32
unzip the downloaded flash files, open them up and rename file called noforce to force, exit out of folders
put the entire folder and subfolders onto the usb, plug it in rear port of the box and switch box on, it will flash automatically
Hi
Got the right image but wooshbuild doesn't complete so watching tv with openatv it scanned sky and bouquets ok on openatv but the wooshbuild won't complete
Sorry to be a pain should I just keep trying to put it on?
pabloescaban
VIP Member
once it gets to hdmi settings, ignore it, put the remote down and follow the infinity instructions rom the point where you paste the code into Terminal using webif, this will add all the WB infinity enhancements and you simply answer yes/no and choose skins and tuners etc
What part of wooshbuild doesn't complete?
where is it stalling installation?
cheers im in now but took a long time getting there compared with h2s
I got a message no nims sky!! Then stuck on configuration, I done the scan prior to putting on wooshbuild and the last time it got to that bit it scanned and finished installation Thanks again
banntheman
Member
Hi I flashed an h2s box with the latest infinity image , I put on the wb freeview sat skin I set up the tuners (a&B) to 28.2 I tried to run a scan but its showing up as tuner b is not working, I changed cables to rule out if the problem was my cable but they are working ok as I tested them individually on tuner A , any help on this will be greatly appreciated.
Hi
Just a small issue that you may be able to help me with, the latest installation of wooshbuild on my h7s
works better in the epg with regards to recording !! on my old box h2s when I record any programme it zips back to the present time after pressing record !! Is that a box thing or if I overwrite infinity will it fix the zipping back issue on h2s?
Help would be greatly appreciated
pabloescaban
VIP Member
I've never recorded anything on these boxes so not really in a position to say, but you may wish to rephrase your request as I can't understand a word of it:
when I record any programme it zips back to the present time after pressing record?
is it doing this on the H2s and the H7s?
what is it supposed to do?
Sorry I thought you may have known!!
When I push the epg button the programmes come up, so now I want to record something at 9pm on one channel and say 10pm on another channel, when I press the record function on the 9pm programme it completes the task but returns to the real time so I have to scroll back to 10pm to record!!
The infinity I put on the h7s does not jump back but holds it place so you can just complete any recordings.
Does that make sense?
pabloescaban
VIP Member
It does now, thanks, although I don't know anything about timeshift and recording as I've never looked into it, someone will know
Hi, just got a Zgemmah5 and was installing whooshbuild infinity when pc crashed. The box is now stuck in a loop with the Infinity logo and goes from 00 to 99 and then back to 00. I've tried flashing again using various USB sticks formatted to FAT32 but bix goes straight to boot and the logo everytime.
Tried a putty session to the box and it tried the whooshbuild install command and comes back saying refusing to load file 'var\cache\opkg\...setup.ipk' as it matches the installed version of enigma2-plugin-extensions-wbi-easy-setup (1.50), so i deleted the ipk in that location and still get the same message. I can't open in webif browser so am using putty, it also comes back saying 'Unknown package 'http://wbuildx.co.uk/setup.ipk' and can't install.
Any help on this appreciated as am not a linux expert!!
Tried a putty session to the box and it tried the whooshbuild install command and comes back saying refusing to load file 'var\cache\opkg\...setup.ipk' as it matches the installed version of enigma2-plugin-extensions-wbi-easy-setup (1.50), so i deleted the ipk in that location and still get the same message. I can't open in webif browser so am using putty, it also comes back saying 'Unknown package 'http://wbuildx.co.uk/setup.ipk' and can't install.
Any help on this appreciated as am not a linux expert!!
bazcfc1
VIP Member
You need to put opkg install then the command
Sorry I did that and it returned the error as above, just didn't add it in the question I asked. Heres the full command and errors:
opkg install http://wbuildx.co.uk/setup.ipk
Downloading http://wbuildx.co.uk/setup.ipk.
Refusing to load file '/var/cache/opkg/b00ee9eca1a4a323632ef0439851ee2c_setup.ipk' as it matches the installed version of enigma2-plugin-extensions-wbi-easy-setup (1.50).
Unknown package 'http://wbuildx.co.uk/setup.ipk'.
Collected errors:
* opkg_solver_install: Cannot install package http://wbuildx.co.uk/setup.ipk.
pabloescaban
VIP Member
it won't download because it's already downloaded.
you need to flash openatv6.2 to the box, you need to try a different USB, if you've already tried a few, try a few more as this is extremely common, Asda do cheap Sandisk Cruzer blade usb, these seem to work every time
pabloescaban
VIP Member
download and unzip the files from here, choose the top one from the two
http://images2.mynonpublic.com/openatv/current/index.php?open=zgemmah5
unzip the files and open the folder and subfolder, rename the file called noforce to force
format the Cruzer (fat32) and put the flash files (inside the folders and subfolder) onto the usb
switch box off at white button, put usb in rear port and power on white button, it should flash as normal
Tried that, even tried a 3rd USB drive and still boots up rather then flashing...decided to go to the manual and it said the 3h image which is for a h2h so tried that aswell...no joy.
Where do i go from here, box arrived this morning!!
Last edited: