Viark VIARK TYPE BOXES

[scouse645]

should be getting the viark 4k in a few days, one thing i never gave a thought to is i don't have any hdmi ports left on my lg oled, all 4 are being used, can someone point me to the right place for a channel list for this box?

 

[kegnkiwi]

should be getting the viark 4k in a few days, one thing i never gave a thought to is i don't have any hdmi ports left on my lg oled, all 4 are being used, can someone point me to the right place for a channel list for this box?

Just buy your self a 3 or 5 into 1 hdmi splitter,. I use one and have viark, solo 4k and blueray player all using one port.

I posted a channel list earlier in this thread. The channel editor is currently unavailable so the lists are just what I scanned in.

 

[Ferret.]

should be getting the viark 4k in a few days, one thing i never gave a thought to is i don't have any hdmi ports left on my lg oled, all 4 are being used, can someone point me to the right place for a channel list for this box?

if your not motorized @cokeaddict did one for 28e with Favourites.

 

[regy101]

should be getting the viark 4k in a few days, one thing i never gave a thought to is i don't have any hdmi ports left on my lg oled, all 4 are being used, can someone point me to the right place for a channel list for this box?

To be honest, i done a blind scan then arranged all my channels into favourites. I found it easier that way and quicker to get to the channel i want. It appears the same interface as the old Skybox f3 i had quite a few year ago. I wonder what the difference is.

 

[scouse645]

I did buy a 2 way hdmi splitter a while ago, never did get it to work, not much faith in them after that.

 

[smithysmudge]

The glitching has been sorted rock steady today

Spoiler alert just tried the sat 4K and still unwatchable but steady as a rock on the DRS2

 

[scouse645]

i have received my viark, just setting it up, i presume if you have a motorised system you need to set the usals?

 

[smithysmudge]

i have received my viark, just setting it up, i presume if you have a motorised system you need to set the usals?

Yes just setup your longitude and latitude for your location from somewhere like dishpointer.com

 

[kegnkiwi]

i have received my viark, just setting it up, i presume if you have a motorised system you need to set the usals?

If you are interested mate, i did an update to the how-to guide that includes setting up usals. I was going to add some more to it but if it helps you can have it now.

 

[scouse645]

i think i need that help, thanks.

 

[scouse645]

having trouble with usals configuration, if i say what my longitude and latitude is can someone tell me what to put in there?

 

[kegnkiwi]

having trouble with usals configuration, if i say what my longitude and latitude is can someone tell me what to put in there?

It is in the how-to but here is a screen dump

 

[waqy]

having trouble with usals configuration, if i say what my longitude and latitude is can someone tell me what to put in there?

go to www.dishpointer.com

Type in your address or postcode. It will give you your position coordinates

 

[kegnkiwi]

Or just put your postcode in here. Latitude and Longitude Finder on Map Get Coordinates

If you get a - in the longitude in usually means you are west I believe.

 

[smithysmudge]

Your latitude is easy enough as it will be North and just input coordinates from dishpointer.
Your longitude will be east or west depending on your location if it’s a minus figure it’s west and a positive figure will be east You don’t need to try and enter the minus sign if it’s west just enter the coordinates

 

[scouse645]

i think i'm getting there, but don't seem to have any quality on the signal.

 

[kegnkiwi]

Did you follow the last bit in the guide which was to go into each satellite setting and turn usals on for each satellite you want your motor to be able to move to? Without doing that the motor won't move to another satellite and will come up with a weak signal on the screen.

 

[scouse645]

Did you follow the last bit in the guide which was to go into each satellite setting and turn usals on for each satellite you want your motor to be able to move to? Without doing that the motor won't move to another satellite and will come up with a weak signal on the screen.

Thanks, yes i did that , it still shows no quality.

 

[scouse645]

when it's searching for channels does the list come up on the screen?

 

[smithysmudge]

Your best bet would be to park the viark on 28.2e then switch it off, connect the box you were previously using and sent it to 28.2e and see if you are getting a signal if so reconnect the viark and you should be able to scan 28.2e followed by any other sats you can get from your location.