UNO 4K glitches/freezes

Maynard0

Newbie
Hi everyone, been having a few problems with my uno 4K. I get glitches every few minutes. It's flashed with openvix and just updated my oscam to the latest one. I no it's been discussed a few time and I'm 90% sure my config files are right and the line is ok. I was reading a post about it possibly being the splitter or the power levels on the cable line itself. The splitter is this one from screw fix

(http://www.screwfix.com/p/labgear-2...gclsrc=aw.ds&dclid=CJGw_5rnodYCFYmhUQodoI8FNw)

I've checked the power levels through the super hub which do look very low.
IMG_0995.PNG
IMG_0996.PNG

Also for clarity my live log when on MTV HD
1505293928668.jpeg

Any help would be appreciated.
Thanks
 
Splitter is fine mate i use them all the time from you readings all looks ok
So its ether line provider or internet
But could be your oscam server config
 
Last edited:
Most channels I've tried do glitch. MTV hd is every 5-10 seconds, sky movies could be between a few minutes to an hour. Changed to black hole last night and to MTV HD is still glitching every few seconds, my config files are



[global]
logfile = /dev/tty
clienttimeout = 4000
clientmaxidle = 300
netprio = 1
nice = -1
maxlogsize = 1000
waitforcards = 0
preferlocalcards = 1
dropdups = 1

[cache]

[streamrelay]

[dvbapi]
enabled = 1
au = 1
pmt_mode = 0
request_mode = 1
delayer = 60
user = linuxsatsupport
read_sdt = 1
write_sdt_prov = 1
boxtype = dreambox

[webif]
httpport = 8888
httpshowmeminfo = 1
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 127.0.0.1,192.1.0.0-192.168.255.255
http_status_log = 1

[account]
user = linuxsatsupport
group = 1

[reader]
label=cableman1.zapto.org
enable=1
protocol=cccam
device=cableman1.zapto.org,1926
user=****
password=****
cccversion=2.1.2
group=1
inactivitytimeout=1
reconnecttimeout=30

Would it be worth trying the mgcamd for black hole and convert my c line. Does anyone have any experience with it?
 
Delete your server dns mate.
Up your client timeout to 7000.
Try another test line.
Also consider backing up and trying VIX.
 
Started with vix now on black hole. DNS is now set to all 0. Next step would be a new line. Is MTV HD a specific frequency/caid? And I'm only saying about MTV HD as it is the one to glitch the most.
 
No still 1841. Few servers been struggling with that channel but movies should be spot on. Is that an eBay server?

Sent from my HUAWEI VNS-L31 using Tapatalk
 
Last edited:
Nah not an ebayer server, but I think the server is pretty new, went from supplying sly to vermin. So kept with them. It's only a c line could that be the reason? Is there any advanced setting I could tweak?
 
There is lot of VM issues still but an an N in mgcamd will use server cache to help general freezes. Try Willos files too.
 
cable is much more critical in use as signal can vary,question would be how old is it and quality in use?
splitter in use?
wifi or hard wired?
shithub in use?
and remember any outside issues posted?
 
splitter is not correct for vm as they use 5-1000mhz the correct one.then wonder about cables in use:grimacing:

Hey Kid
I’ve not spent years testing things to have you stab me in the back :mad:
The splitters in question have been tested by me and i have found them to be as good if not better than the ones supply by vm
 
they are outside the range that vm use and can let in interference,some people have no issues but others do so i always suggest in using the correct ones.
user can make up their own minds of what to use.
 
Hi all, just a little update. I got another line which is ok 70% of the time but still getting freezing. Does anyone have any other things to try? Could someone tell me if setting up cacheex in Oscam would help? Or loadbalancing? I don’t understand either of these that’s the only reason why I’m asking.
Thanks
 
Have you tried an HDU?
I had a similar problem, but I use NLine and MGCAMD.
Bought and HDU off ebay and it stopped all freezing

Sent from my SM-N910F using Tapatalk
 
Been using the hdu now for a few days but has not rectified the problems. Is there any reads that could imply that is an outside problem? Any other ideas would be very much appreciated.
 
Back
Top